Module cc2650::aon_wuc

This component control the Wakeup controller residing in the AON domain. Note: This module is only supporting 32 bit ReadWrite access from MCU

Modules

auxcfg	AUX Configuration This register contains power management related signals for the AUX domain.
auxclk	AUX Clock Management This register contains bitfields that are relevant for setting up the clock to the AUX domain.
auxctl	AUX Control This register contains events and control signals for the AUX domain.
ctl0	Control 0 This register contains various chip level control and debug bitfields.
ctl1	Control 1 This register contains various chip level control and debug bitfields.
jtagcfg	JTAG Configuration This register contains control for configuration of the JTAG domain,- hereunder access permissions for each TAP.
jtagusercode	JTAG USERCODE Boot code copies the JTAG USERCODE to this register from where it is forwarded to the debug subsystem.
mcucfg	MCU Configuration This register contains power management related bitfields for the MCU domain.
mcuclk	MCU Clock Management This register contains bitfields related to the MCU clock.
osccfg	Oscillator Configuration This register sets the period for Amplitude compensation requests sent to the oscillator control system. The amplitude compensations is only applicable when XOSC_HF is running in low power mode.
pwrstat	Power Status This register is used to monitor various power management related signals in AON. Most signals are for test, calibration and debug purpose only, and others can be used to detect that AUX or JTAG domains are powered up.
rechargecfg	Recharge Controller Configuration This register sets all relevant patameters for controlling the recharge algorithm.
rechargestat	Recharge Controller Status This register controls various status registers which are updated during recharge. The register is mostly intended for test and debug.
shutdown	Shutdown Control This register contains bitfields required for entering shutdown mode

Structs

AUXCFG	AUX Configuration This register contains power management related signals for the AUX domain.
AUXCLK	AUX Clock Management This register contains bitfields that are relevant for setting up the clock to the AUX domain.
AUXCTL	AUX Control This register contains events and control signals for the AUX domain.
CTL0	Control 0 This register contains various chip level control and debug bitfields.
CTL1	Control 1 This register contains various chip level control and debug bitfields.
JTAGCFG	JTAG Configuration This register contains control for configuration of the JTAG domain,- hereunder access permissions for each TAP.
JTAGUSERCODE	JTAG USERCODE Boot code copies the JTAG USERCODE to this register from where it is forwarded to the debug subsystem.
MCUCFG	MCU Configuration This register contains power management related bitfields for the MCU domain.
MCUCLK	MCU Clock Management This register contains bitfields related to the MCU clock.
OSCCFG	Oscillator Configuration This register sets the period for Amplitude compensation requests sent to the oscillator control system. The amplitude compensations is only applicable when XOSC_HF is running in low power mode.
PWRSTAT	Power Status This register is used to monitor various power management related signals in AON. Most signals are for test, calibration and debug purpose only, and others can be used to detect that AUX or JTAG domains are powered up.
RECHARGECFG	Recharge Controller Configuration This register sets all relevant patameters for controlling the recharge algorithm.
RECHARGESTAT	Recharge Controller Status This register controls various status registers which are updated during recharge. The register is mostly intended for test and debug.
RegisterBlock	Register block
SHUTDOWN	Shutdown Control This register contains bitfields required for entering shutdown mode