[−][src]Module cc2650::gpio
MCU GPIO - I/F for controlling and reading IO status and IO event status
Modules
din31_0 | Data Input from DIO 0 to 31 |
doe31_0 | Data Output Enable for DIO 0 to 31 |
dout11_8 | Data Out 8 to 11 Alias register for byte access to each bit in DOUT31_0 |
dout15_12 | Data Out 12 to 15 Alias register for byte access to each bit in DOUT31_0 |
dout19_16 | Data Out 16 to 19 Alias register for byte access to each bit in DOUT31_0 |
dout23_20 | Data Out 20 to 23 Alias register for byte access to each bit in DOUT31_0 |
dout27_24 | Data Out 24 to 27 Alias register for byte access to each bit in DOUT31_0 |
dout31_0 | Data Output for DIO 0 to 31 |
dout31_28 | Data Out 28 to 31 Alias register for byte access to each bit in DOUT31_0 |
dout3_0 | Data Out 0 to 3 Alias register for byte access to each bit in DOUT31_0 |
dout7_4 | Data Out 4 to 7 Alias register for byte access to each bit in DOUT31_0 |
doutclr31_0 | Data Out Clear Writing 1 to a bit position clears the corresponding bit in the DOUT31_0 register |
doutset31_0 | Data Out Set Writing 1 to a bit position sets the corresponding bit in the DOUT31_0 register |
douttgl31_0 | Data Out Toggle Writing 1 to a bit position will invert the corresponding DIO output. |
evflags31_0 | Event Register for DIO 0 to 31 Reading this registers will return 1 for triggered event and 0 for non-triggered events. Writing a 1 to a bit field will clear the event. The configuration of events is done inside MCU IOC, e.g. events for DIO #0 is configured in IOC:IOCFG0.EDGE_DET and IOC:IOCFG0.EDGE_IRQ_EN. |
Structs
DIN31_0 | Data Input from DIO 0 to 31 |
DOE31_0 | Data Output Enable for DIO 0 to 31 |
DOUT11_8 | Data Out 8 to 11 Alias register for byte access to each bit in DOUT31_0 |
DOUT15_12 | Data Out 12 to 15 Alias register for byte access to each bit in DOUT31_0 |
DOUT19_16 | Data Out 16 to 19 Alias register for byte access to each bit in DOUT31_0 |
DOUT23_20 | Data Out 20 to 23 Alias register for byte access to each bit in DOUT31_0 |
DOUT27_24 | Data Out 24 to 27 Alias register for byte access to each bit in DOUT31_0 |
DOUT31_0 | Data Output for DIO 0 to 31 |
DOUT31_28 | Data Out 28 to 31 Alias register for byte access to each bit in DOUT31_0 |
DOUT3_0 | Data Out 0 to 3 Alias register for byte access to each bit in DOUT31_0 |
DOUT7_4 | Data Out 4 to 7 Alias register for byte access to each bit in DOUT31_0 |
DOUTCLR31_0 | Data Out Clear Writing 1 to a bit position clears the corresponding bit in the DOUT31_0 register |
DOUTSET31_0 | Data Out Set Writing 1 to a bit position sets the corresponding bit in the DOUT31_0 register |
DOUTTGL31_0 | Data Out Toggle Writing 1 to a bit position will invert the corresponding DIO output. |
EVFLAGS31_0 | Event Register for DIO 0 to 31 Reading this registers will return 1 for triggered event and 0 for non-triggered events. Writing a 1 to a bit field will clear the event. The configuration of events is done inside MCU IOC, e.g. events for DIO #0 is configured in IOC:IOCFG0.EDGE_DET and IOC:IOCFG0.EDGE_IRQ_EN. |
RegisterBlock | Register block |