[−][src]Module cc13x2_cc26x2_hal::aon_batmon
Always On (AON) Battery And Temperature MONitor (BATMON) residing in the AON domain Note: This module only supports 32 bit Read/Write access from MCU.
Modules
| bat | Last Measured Battery Voltage This register may be read while BATUPD.STAT = 1 |
| batmonp0 | Internal. Only to be used through TI provided API. |
| batmonp1 | Internal. Only to be used through TI provided API. |
| battll | Battery Lower Limit |
| battul | Battery Upper Limit |
| batupd | Battery Update Indicates BAT Updates |
| ctl | Internal. Only to be used through TI provided API. |
| event | Event |
| eventmask | Event Mask |
| flashpumpp0 | Internal. Only to be used through TI provided API. |
| iostrp0 | Internal. Only to be used through TI provided API. |
| meascfg | Internal. Only to be used through TI provided API. |
| temp | Temperature Last Measured Temperature in Degrees Celsius This register may be read while TEMPUPD.STAT = 1. |
| templl | Temperature Lower Limit |
| tempp0 | Internal. Only to be used through TI provided API. |
| tempp1 | Internal. Only to be used through TI provided API. |
| tempp2 | Internal. Only to be used through TI provided API. |
| tempul | Temperature Upper Limit |
| tempupd | Temperature Update Indicates TEMP Updates |
Structs
| BAT | Last Measured Battery Voltage This register may be read while BATUPD.STAT = 1 |
| BATMONP0 | Internal. Only to be used through TI provided API. |
| BATMONP1 | Internal. Only to be used through TI provided API. |
| BATTLL | Battery Lower Limit |
| BATTUL | Battery Upper Limit |
| BATUPD | Battery Update Indicates BAT Updates |
| CTL | Internal. Only to be used through TI provided API. |
| EVENT | Event |
| EVENTMASK | Event Mask |
| FLASHPUMPP0 | Internal. Only to be used through TI provided API. |
| IOSTRP0 | Internal. Only to be used through TI provided API. |
| MEASCFG | Internal. Only to be used through TI provided API. |
| RegisterBlock | Register block |
| TEMP | Temperature Last Measured Temperature in Degrees Celsius This register may be read while TEMPUPD.STAT = 1. |
| TEMPLL | Temperature Lower Limit |
| TEMPP0 | Internal. Only to be used through TI provided API. |
| TEMPP1 | Internal. Only to be used through TI provided API. |
| TEMPP2 | Internal. Only to be used through TI provided API. |
| TEMPUL | Temperature Upper Limit |
| TEMPUPD | Temperature Update Indicates TEMP Updates |