Struct aws_sdk_wafv2::types::builders::JsonBodyBuilder

#[non_exhaustive]
pub struct JsonBodyBuilder { /* private fields */ }

A builder for JsonBody.

Implementations

impl JsonBodyBuilder

pub fn match_pattern(self, input: JsonMatchPattern) -> Self

The patterns to look for in the JSON body. WAF inspects the results of these pattern matches against the rule inspection criteria.

This field is required.

pub fn set_match_pattern(self, input: Option<JsonMatchPattern>) -> Self

The patterns to look for in the JSON body. WAF inspects the results of these pattern matches against the rule inspection criteria.

pub fn get_match_pattern(&self) -> &Option<JsonMatchPattern>

The patterns to look for in the JSON body. WAF inspects the results of these pattern matches against the rule inspection criteria.

pub fn match_scope(self, input: JsonMatchScope) -> Self

The parts of the JSON to match against using the MatchPattern. If you specify ALL, WAF matches against keys and values.

All does not require a match to be found in the keys and a match to be found in the values. It requires a match to be found in the keys or the values or both. To require a match in the keys and in the values, use a logical AND statement to combine two match rules, one that inspects the keys and another that inspects the values.

This field is required.

pub fn set_match_scope(self, input: Option<JsonMatchScope>) -> Self

The parts of the JSON to match against using the MatchPattern. If you specify ALL, WAF matches against keys and values.

All does not require a match to be found in the keys and a match to be found in the values. It requires a match to be found in the keys or the values or both. To require a match in the keys and in the values, use a logical AND statement to combine two match rules, one that inspects the keys and another that inspects the values.

pub fn get_match_scope(&self) -> &Option<JsonMatchScope>

The parts of the JSON to match against using the MatchPattern. If you specify ALL, WAF matches against keys and values.

All does not require a match to be found in the keys and a match to be found in the values. It requires a match to be found in the keys or the values or both. To require a match in the keys and in the values, use a logical AND statement to combine two match rules, one that inspects the keys and another that inspects the values.

pub fn invalid_fallback_behavior( self, input: BodyParsingFallbackBehavior ) -> Self

What WAF should do if it fails to completely parse the JSON body. The options are the following:

• EVALUATE_AS_STRING - Inspect the body as plain text. WAF applies the text transformations and inspection criteria that you defined for the JSON inspection to the body text string.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

If you don't provide this setting, WAF parses and evaluates the content only up to the first parsing failure that it encounters.

WAF does its best to parse the entire JSON body, but might be forced to stop for reasons such as invalid characters, duplicate keys, truncation, and any content whose root node isn't an object or an array.

WAF parses the JSON in the following examples as two valid key, value pairs:

• Missing comma: {"key1":"value1""key2":"value2"}

• Missing colon: {"key1":"value1","key2""value2"}

• Extra colons: {"key1"::"value1","key2""value2"}

pub fn set_invalid_fallback_behavior( self, input: Option<BodyParsingFallbackBehavior> ) -> Self

What WAF should do if it fails to completely parse the JSON body. The options are the following:

• EVALUATE_AS_STRING - Inspect the body as plain text. WAF applies the text transformations and inspection criteria that you defined for the JSON inspection to the body text string.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

If you don't provide this setting, WAF parses and evaluates the content only up to the first parsing failure that it encounters.

WAF does its best to parse the entire JSON body, but might be forced to stop for reasons such as invalid characters, duplicate keys, truncation, and any content whose root node isn't an object or an array.

WAF parses the JSON in the following examples as two valid key, value pairs:

• Missing comma: {"key1":"value1""key2":"value2"}

• Missing colon: {"key1":"value1","key2""value2"}

• Extra colons: {"key1"::"value1","key2""value2"}

pub fn get_invalid_fallback_behavior( &self ) -> &Option<BodyParsingFallbackBehavior>

What WAF should do if it fails to completely parse the JSON body. The options are the following:

• EVALUATE_AS_STRING - Inspect the body as plain text. WAF applies the text transformations and inspection criteria that you defined for the JSON inspection to the body text string.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

If you don't provide this setting, WAF parses and evaluates the content only up to the first parsing failure that it encounters.

WAF does its best to parse the entire JSON body, but might be forced to stop for reasons such as invalid characters, duplicate keys, truncation, and any content whose root node isn't an object or an array.

WAF parses the JSON in the following examples as two valid key, value pairs:

• Missing comma: {"key1":"value1""key2":"value2"}

• Missing colon: {"key1":"value1","key2""value2"}

• Extra colons: {"key1"::"value1","key2""value2"}

pub fn oversize_handling(self, input: OversizeHandling) -> Self

What WAF should do if the body is larger than WAF can inspect.

WAF does not support inspecting the entire contents of the web request body if the body exceeds the limit for the resource type. When a web request body is larger than the limit, the underlying host service only forwards the contents that are within the limit to WAF for inspection.

• For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

• For CloudFront, API Gateway, Amazon Cognito, App Runner, and Verified Access, the default limit is 16 KB (16,384 bytes), and you can increase the limit for each resource type in the web ACL AssociationConfig, for additional processing fees.

The options for oversize handling are the following:

• CONTINUE - Inspect the available body contents normally, according to the rule inspection criteria.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over the limit.

Default: CONTINUE

pub fn set_oversize_handling(self, input: Option<OversizeHandling>) -> Self

What WAF should do if the body is larger than WAF can inspect.

WAF does not support inspecting the entire contents of the web request body if the body exceeds the limit for the resource type. When a web request body is larger than the limit, the underlying host service only forwards the contents that are within the limit to WAF for inspection.

• For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

• For CloudFront, API Gateway, Amazon Cognito, App Runner, and Verified Access, the default limit is 16 KB (16,384 bytes), and you can increase the limit for each resource type in the web ACL AssociationConfig, for additional processing fees.

The options for oversize handling are the following:

• CONTINUE - Inspect the available body contents normally, according to the rule inspection criteria.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over the limit.

Default: CONTINUE

pub fn get_oversize_handling(&self) -> &Option<OversizeHandling>

What WAF should do if the body is larger than WAF can inspect.

WAF does not support inspecting the entire contents of the web request body if the body exceeds the limit for the resource type. When a web request body is larger than the limit, the underlying host service only forwards the contents that are within the limit to WAF for inspection.

• For Application Load Balancer and AppSync, the limit is fixed at 8 KB (8,192 bytes).

• For CloudFront, API Gateway, Amazon Cognito, App Runner, and Verified Access, the default limit is 16 KB (16,384 bytes), and you can increase the limit for each resource type in the web ACL AssociationConfig, for additional processing fees.

The options for oversize handling are the following:

• CONTINUE - Inspect the available body contents normally, according to the rule inspection criteria.

• MATCH - Treat the web request as matching the rule statement. WAF applies the rule action to the request.

• NO_MATCH - Treat the web request as not matching the rule statement.

You can combine the MATCH or NO_MATCH settings for oversize handling with your rule and web ACL action settings, so that you block any request whose body is over the limit.

Default: CONTINUE

pub fn build(self) -> Result<JsonBody, BuildError>

Consumes the builder and constructs a JsonBody. This method will fail if any of the following fields are not set:

• match_scope

Trait Implementations

impl Clone for JsonBodyBuilder

fn clone(&self) -> JsonBodyBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for JsonBodyBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for JsonBodyBuilder

fn default() -> JsonBodyBuilder

Returns the “default value” for a type.

impl PartialEq for JsonBodyBuilder

fn eq(&self, other: &JsonBodyBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for JsonBodyBuilder