Struct aws_sdk_ssm::model::AssociationVersionInfo [−][src]
#[non_exhaustive]pub struct AssociationVersionInfo {Show 17 fields
pub association_id: Option<String>,
pub association_version: Option<String>,
pub created_date: Option<Instant>,
pub name: Option<String>,
pub document_version: Option<String>,
pub parameters: Option<HashMap<String, Vec<String>>>,
pub targets: Option<Vec<Target>>,
pub schedule_expression: Option<String>,
pub output_location: Option<InstanceAssociationOutputLocation>,
pub association_name: Option<String>,
pub max_errors: Option<String>,
pub max_concurrency: Option<String>,
pub compliance_severity: Option<AssociationComplianceSeverity>,
pub sync_compliance: Option<AssociationSyncCompliance>,
pub apply_only_at_cron_interval: bool,
pub calendar_names: Option<Vec<String>>,
pub target_locations: Option<Vec<TargetLocation>>,
}
Expand description
Information about the association version.
Fields (Non-exhaustive)
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.association_id: Option<String>
The ID created by the system when the association was created.
association_version: Option<String>
The association version.
created_date: Option<Instant>
The date the association version was created.
name: Option<String>
The name specified when the association was created.
document_version: Option<String>
The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
parameters: Option<HashMap<String, Vec<String>>>
Parameters specified when the association version was created.
targets: Option<Vec<Target>>
The targets specified for the association when the association version was created.
schedule_expression: Option<String>
The cron or rate schedule specified for the association when the association version was created.
output_location: Option<InstanceAssociationOutputLocation>
The location in Amazon S3 specified for the association when the association version was created.
association_name: Option<String>
The name specified for the association version when the association version was created.
max_errors: Option<String>
The number of errors that are allowed before the system stops sending requests to run the
association on additional targets. You can specify either an absolute number of errors, for
example 10, or a percentage of the target set, for example 10%. If you specify 3, for example,
the system stops sending requests when the fourth error is received. If you specify 0, then the
system stops sending requests after the first error is returned. If you run an association on 50
instances and set MaxError
to 10%, then the system stops sending the request when
the sixth error is received.
Executions that are already running an association when MaxErrors
is reached
are allowed to complete, but some of these executions may fail as well. If you need to ensure
that there won't be more than max-errors failed executions, set MaxConcurrency
to 1
so that executions proceed one at a time.
max_concurrency: Option<String>
The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
If a new instance starts and attempts to run an association while Systems Manager is running
MaxConcurrency
associations, the association is allowed to run. During the next
association interval, the new instance will process its association within the limit specified
for MaxConcurrency
.
compliance_severity: Option<AssociationComplianceSeverity>
The severity level that is assigned to the association.
sync_compliance: Option<AssociationSyncCompliance>
The mode for generating association compliance. You can specify AUTO
or
MANUAL
. In AUTO
mode, the system uses the status of the association
execution to determine the compliance status. If the association execution runs successfully,
then the association is COMPLIANT
. If the association execution doesn't run
successfully, the association is NON-COMPLIANT
.
In MANUAL
mode, you must specify the AssociationId
as a parameter
for the PutComplianceItems API operation. In this case, compliance data isn't
managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the
PutComplianceItems API operation.
By default, all associations use AUTO
mode.
apply_only_at_cron_interval: bool
By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
calendar_names: Option<Vec<String>>
The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
target_locations: Option<Vec<TargetLocation>>
The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
Implementations
The ID created by the system when the association was created.
The association version.
The date the association version was created.
The version of an Amazon Web Services Systems Manager document (SSM document) used when the association version was created.
Parameters specified when the association version was created.
The targets specified for the association when the association version was created.
The cron or rate schedule specified for the association when the association version was created.
The location in Amazon S3 specified for the association when the association version was created.
The name specified for the association version when the association version was created.
The number of errors that are allowed before the system stops sending requests to run the
association on additional targets. You can specify either an absolute number of errors, for
example 10, or a percentage of the target set, for example 10%. If you specify 3, for example,
the system stops sending requests when the fourth error is received. If you specify 0, then the
system stops sending requests after the first error is returned. If you run an association on 50
instances and set MaxError
to 10%, then the system stops sending the request when
the sixth error is received.
Executions that are already running an association when MaxErrors
is reached
are allowed to complete, but some of these executions may fail as well. If you need to ensure
that there won't be more than max-errors failed executions, set MaxConcurrency
to 1
so that executions proceed one at a time.
The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
If a new instance starts and attempts to run an association while Systems Manager is running
MaxConcurrency
associations, the association is allowed to run. During the next
association interval, the new instance will process its association within the limit specified
for MaxConcurrency
.
The severity level that is assigned to the association.
The mode for generating association compliance. You can specify AUTO
or
MANUAL
. In AUTO
mode, the system uses the status of the association
execution to determine the compliance status. If the association execution runs successfully,
then the association is COMPLIANT
. If the association execution doesn't run
successfully, the association is NON-COMPLIANT
.
In MANUAL
mode, you must specify the AssociationId
as a parameter
for the PutComplianceItems API operation. In this case, compliance data isn't
managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the
PutComplianceItems API operation.
By default, all associations use AUTO
mode.
By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations for this version only run when that Change Calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
The combination of Amazon Web Services Regions and Amazon Web Services accounts where you wanted to run the association when this association version was created.
Creates a new builder-style object to manufacture AssociationVersionInfo
Trait Implementations
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
This method tests for !=
.
Auto Trait Implementations
impl RefUnwindSafe for AssociationVersionInfo
impl Send for AssociationVersionInfo
impl Sync for AssociationVersionInfo
impl Unpin for AssociationVersionInfo
impl UnwindSafe for AssociationVersionInfo
Blanket Implementations
Mutably borrows from an owned value. Read more
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more