Struct aws_sdk_rds::operation::create_global_cluster::builders::CreateGlobalClusterFluentBuilder

source · 
pub struct CreateGlobalClusterFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateGlobalCluster.

Creates an Aurora global database spread across multiple Amazon Web Services Regions. The global database contains a single primary cluster with read-write capability, and a read-only secondary cluster that receives data from the primary cluster through high-speed replication performed by the Aurora storage subsystem.

You can create a global database that is initially empty, and then create the primary and secondary DB clusters in the global database. Or you can specify an existing Aurora cluster during the create operation, and this cluster becomes the primary cluster of the global database.

This operation applies only to Aurora DB clusters.

Implementations§

source§

impl CreateGlobalClusterFluentBuilder

source

pub fn as_input(&self) -> &CreateGlobalClusterInputBuilder

Access the CreateGlobalCluster as a reference.

source

pub async fn send( self ) -> Result<CreateGlobalClusterOutput, SdkError<CreateGlobalClusterError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<CreateGlobalClusterOutput, CreateGlobalClusterError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn global_cluster_identifier(self, input: impl Into<String>) -> Self

The cluster identifier for this global database cluster. This parameter is stored as a lowercase string.

source

pub fn set_global_cluster_identifier(self, input: Option<String>) -> Self

The cluster identifier for this global database cluster. This parameter is stored as a lowercase string.

source

pub fn get_global_cluster_identifier(&self) -> &Option<String>

The cluster identifier for this global database cluster. This parameter is stored as a lowercase string.

source

pub fn source_db_cluster_identifier(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) to use as the primary cluster of the global database.

If you provide a value for this parameter, don't specify values for the following settings because Amazon Aurora uses the values from the specified source DB cluster:

  • DatabaseName

  • Engine

  • EngineVersion

  • StorageEncrypted

source

pub fn set_source_db_cluster_identifier(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) to use as the primary cluster of the global database.

If you provide a value for this parameter, don't specify values for the following settings because Amazon Aurora uses the values from the specified source DB cluster:

  • DatabaseName

  • Engine

  • EngineVersion

  • StorageEncrypted

source

pub fn get_source_db_cluster_identifier(&self) -> &Option<String>

The Amazon Resource Name (ARN) to use as the primary cluster of the global database.

If you provide a value for this parameter, don't specify values for the following settings because Amazon Aurora uses the values from the specified source DB cluster:

  • DatabaseName

  • Engine

  • EngineVersion

  • StorageEncrypted

source

pub fn engine(self, input: impl Into<String>) -> Self

The database engine to use for this global database cluster.

Valid Values: aurora-mysql | aurora-postgresql

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine of the source DB cluster.

source

pub fn set_engine(self, input: Option<String>) -> Self

The database engine to use for this global database cluster.

Valid Values: aurora-mysql | aurora-postgresql

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine of the source DB cluster.

source

pub fn get_engine(&self) -> &Option<String>

The database engine to use for this global database cluster.

Valid Values: aurora-mysql | aurora-postgresql

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine of the source DB cluster.

source

pub fn engine_version(self, input: impl Into<String>) -> Self

The engine version to use for this global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine version of the source DB cluster.

source

pub fn set_engine_version(self, input: Option<String>) -> Self

The engine version to use for this global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine version of the source DB cluster.

source

pub fn get_engine_version(&self) -> &Option<String>

The engine version to use for this global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the engine version of the source DB cluster.

source

pub fn deletion_protection(self, input: bool) -> Self

Specifies whether to enable deletion protection for the new global database cluster. The global database can't be deleted when deletion protection is enabled.

source

pub fn set_deletion_protection(self, input: Option<bool>) -> Self

Specifies whether to enable deletion protection for the new global database cluster. The global database can't be deleted when deletion protection is enabled.

source

pub fn get_deletion_protection(&self) -> &Option<bool>

Specifies whether to enable deletion protection for the new global database cluster. The global database can't be deleted when deletion protection is enabled.

source

pub fn database_name(self, input: impl Into<String>) -> Self

The name for your database of up to 64 alphanumeric characters. If you don't specify a name, Amazon Aurora doesn't create a database in the global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the database name from the source DB cluster.

source

pub fn set_database_name(self, input: Option<String>) -> Self

The name for your database of up to 64 alphanumeric characters. If you don't specify a name, Amazon Aurora doesn't create a database in the global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the database name from the source DB cluster.

source

pub fn get_database_name(&self) -> &Option<String>

The name for your database of up to 64 alphanumeric characters. If you don't specify a name, Amazon Aurora doesn't create a database in the global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the database name from the source DB cluster.

source

pub fn storage_encrypted(self, input: bool) -> Self

Specifies whether to enable storage encryption for the new global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the setting from the source DB cluster.

source

pub fn set_storage_encrypted(self, input: Option<bool>) -> Self

Specifies whether to enable storage encryption for the new global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the setting from the source DB cluster.

source

pub fn get_storage_encrypted(&self) -> &Option<bool>

Specifies whether to enable storage encryption for the new global database cluster.

Constraints:

  • Can't be specified if SourceDBClusterIdentifier is specified. In this case, Amazon Aurora uses the setting from the source DB cluster.

Trait Implementations§

source§

impl Clone for CreateGlobalClusterFluentBuilder

source§

fn clone(&self) -> CreateGlobalClusterFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateGlobalClusterFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more