pub struct CreateDBParameterGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateDBParameterGroup.
Creates a new DB parameter group.
A DB parameter group is initially created with the default parameters for the database engine used by the DB instance. To provide custom values for any of the parameters, you must modify the group after creating it using ModifyDBParameterGroup. Once you've created a DB parameter group, you need to associate it with your DB instance using ModifyDBInstance. When you associate a new DB parameter group with a running DB instance, you need to reboot the DB instance without failover for the new DB parameter group and associated settings to take effect.
After you create a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon Neptune to fully complete the create action before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon Neptune console or the DescribeDBParameters command to verify that your DB parameter group has been created or modified.
Implementations§
Source§impl CreateDBParameterGroupFluentBuilder
impl CreateDBParameterGroupFluentBuilder
Sourcepub fn as_input(&self) -> &CreateDbParameterGroupInputBuilder
pub fn as_input(&self) -> &CreateDbParameterGroupInputBuilder
Access the CreateDBParameterGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateDbParameterGroupOutput, SdkError<CreateDBParameterGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateDbParameterGroupOutput, SdkError<CreateDBParameterGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateDbParameterGroupOutput, CreateDBParameterGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateDbParameterGroupOutput, CreateDBParameterGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
pub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
The name of the DB parameter group.
Constraints:
-
Must be 1 to 255 letters, numbers, or hyphens.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
This value is stored as a lowercase string.
Sourcepub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
pub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
The name of the DB parameter group.
Constraints:
-
Must be 1 to 255 letters, numbers, or hyphens.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
This value is stored as a lowercase string.
Sourcepub fn get_db_parameter_group_name(&self) -> &Option<String>
pub fn get_db_parameter_group_name(&self) -> &Option<String>
The name of the DB parameter group.
Constraints:
-
Must be 1 to 255 letters, numbers, or hyphens.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
This value is stored as a lowercase string.
Sourcepub fn db_parameter_group_family(self, input: impl Into<String>) -> Self
pub fn db_parameter_group_family(self, input: impl Into<String>) -> Self
The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.
Sourcepub fn set_db_parameter_group_family(self, input: Option<String>) -> Self
pub fn set_db_parameter_group_family(self, input: Option<String>) -> Self
The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.
Sourcepub fn get_db_parameter_group_family(&self) -> &Option<String>
pub fn get_db_parameter_group_family(&self) -> &Option<String>
The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.
Sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
The description for the DB parameter group.
Sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
The description for the DB parameter group.
Sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
The description for the DB parameter group.
Appends an item to Tags.
To override the contents of this collection use set_tags.
The tags to be assigned to the new DB parameter group.
The tags to be assigned to the new DB parameter group.
The tags to be assigned to the new DB parameter group.
Trait Implementations§
Source§impl Clone for CreateDBParameterGroupFluentBuilder
impl Clone for CreateDBParameterGroupFluentBuilder
Source§fn clone(&self) -> CreateDBParameterGroupFluentBuilder
fn clone(&self) -> CreateDBParameterGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateDBParameterGroupFluentBuilder
impl !RefUnwindSafe for CreateDBParameterGroupFluentBuilder
impl Send for CreateDBParameterGroupFluentBuilder
impl Sync for CreateDBParameterGroupFluentBuilder
impl Unpin for CreateDBParameterGroupFluentBuilder
impl !UnwindSafe for CreateDBParameterGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);