CalculateRouteMatrixFluentBuilder

aws_sdk_location::operation::calculate_route_matrix::builders

Struct CalculateRouteMatrixFluentBuilder 

Source 
pub struct CalculateRouteMatrixFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CalculateRouteMatrix.

This operation is no longer current and may be deprecated in the future. We recommend you upgrade to the V2 CalculateRouteMatrix unless you require Grab data.

  • This version of CalculateRouteMatrix is part of a previous Amazon Location Service Routes API (version 1) which has been superseded by a more intuitive, powerful, and complete API (version 2).

  • The version 2 CalculateRouteMatrix operation gives better results for matrix routing calculations.

  • If you are using an Amazon Web Services SDK or the Amazon Web Services CLI, note that the Routes API version 2 is found under geo-routes or geo_routes, not under location.

  • Since Grab is not yet fully supported in Routes API version 2, we recommend you continue using API version 1 when using Grab.

  • Start your version 2 API journey with the Routes V2 API Reference or the Developer Guide.

Calculates a route matrix given the following required parameters: DeparturePositions and DestinationPositions. CalculateRouteMatrix calculates routes and returns the travel time and travel distance from each departure position to each destination position in the request. For example, given departure positions A and B, and destination positions X and Y, CalculateRouteMatrix will return time and distance for routes from A to X, A to Y, B to X, and B to Y (in that order). The number of results returned (and routes calculated) will be the number of DeparturePositions times the number of DestinationPositions.

Your account is charged for each route calculated, not the number of requests.

Requires that you first create a route calculator resource.

By default, a request that doesn't specify a departure time uses the best time of day to travel with the best traffic conditions when calculating routes.

Additional options include:

  • Specifying a departure time using either DepartureTime or DepartNow. This calculates routes based on predictive traffic data at the given time.

    You can't specify both DepartureTime and DepartNow in a single request. Specifying both parameters returns a validation error.

  • Specifying a travel mode using TravelMode sets the transportation mode used to calculate the routes. This also lets you specify additional route preferences in CarModeOptions if traveling by Car, or TruckModeOptions if traveling by Truck.

Implementations§

Source§

impl CalculateRouteMatrixFluentBuilder

Source

pub fn as_input(&self) -> &CalculateRouteMatrixInputBuilder

Access the CalculateRouteMatrix as a reference.

Source

pub async fn send( self, ) -> Result<CalculateRouteMatrixOutput, SdkError<CalculateRouteMatrixError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<CalculateRouteMatrixOutput, CalculateRouteMatrixError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn calculator_name(self, input: impl Into<String>) -> Self

The name of the route calculator resource that you want to use to calculate the route matrix.

Source

pub fn set_calculator_name(self, input: Option<String>) -> Self

The name of the route calculator resource that you want to use to calculate the route matrix.

Source

pub fn get_calculator_name(&self) -> &Option<String>

The name of the route calculator resource that you want to use to calculate the route matrix.

Source

pub fn departure_positions(self, input: Vec<f64>) -> Self

Appends an item to DeparturePositions.

To override the contents of this collection use set_departure_positions.

The list of departure (origin) positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-123.115, 49.285\].

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a departure that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDeparturePositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn set_departure_positions(self, input: Option<Vec<Vec<f64>>>) -> Self

The list of departure (origin) positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-123.115, 49.285\].

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a departure that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDeparturePositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn get_departure_positions(&self) -> &Option<Vec<Vec<f64>>>

The list of departure (origin) positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-123.115, 49.285\].

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a departure that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDeparturePositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn destination_positions(self, input: Vec<f64>) -> Self

Appends an item to DestinationPositions.

To override the contents of this collection use set_destination_positions.

The list of destination positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-122.339, 47.615\]

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a destination that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDestinationPositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn set_destination_positions(self, input: Option<Vec<Vec<f64>>>) -> Self

The list of destination positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-122.339, 47.615\]

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a destination that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDestinationPositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn get_destination_positions(&self) -> &Option<Vec<Vec<f64>>>

The list of destination positions for the route matrix. An array of points, each of which is itself a 2-value array defined in WGS 84 format: \[longitude, latitude\]. For example, \[-122.339, 47.615\]

Depending on the data provider selected in the route calculator resource there may be additional restrictions on the inputs you can choose. See Position restrictions in the Amazon Location Service Developer Guide.

For route calculators that use Esri as the data provider, if you specify a destination that's not located on a road, Amazon Location moves the position to the nearest road. The snapped value is available in the result in SnappedDestinationPositions.

Valid Values: \[-180 to 180,-90 to 90\]

Source

pub fn travel_mode(self, input: TravelMode) -> Self

Specifies the mode of transport when calculating a route. Used in estimating the speed of travel and road compatibility.

The TravelMode you specify also determines how you specify route preferences:

  • If traveling by Car use the CarModeOptions parameter.

  • If traveling by Truck use the TruckModeOptions parameter.

Bicycle or Motorcycle are only valid when using Grab as a data provider, and only within Southeast Asia.

Truck is not available for Grab.

For more information about using Grab as a data provider, see GrabMaps in the Amazon Location Service Developer Guide.

Default Value: Car

Source

pub fn set_travel_mode(self, input: Option<TravelMode>) -> Self

Specifies the mode of transport when calculating a route. Used in estimating the speed of travel and road compatibility.

The TravelMode you specify also determines how you specify route preferences:

  • If traveling by Car use the CarModeOptions parameter.

  • If traveling by Truck use the TruckModeOptions parameter.

Bicycle or Motorcycle are only valid when using Grab as a data provider, and only within Southeast Asia.

Truck is not available for Grab.

For more information about using Grab as a data provider, see GrabMaps in the Amazon Location Service Developer Guide.

Default Value: Car

Source

pub fn get_travel_mode(&self) -> &Option<TravelMode>

Specifies the mode of transport when calculating a route. Used in estimating the speed of travel and road compatibility.

The TravelMode you specify also determines how you specify route preferences:

  • If traveling by Car use the CarModeOptions parameter.

  • If traveling by Truck use the TruckModeOptions parameter.

Bicycle or Motorcycle are only valid when using Grab as a data provider, and only within Southeast Asia.

Truck is not available for Grab.

For more information about using Grab as a data provider, see GrabMaps in the Amazon Location Service Developer Guide.

Default Value: Car

Source

pub fn departure_time(self, input: DateTime) -> Self

Specifies the desired time of departure. Uses the given time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Setting a departure time in the past returns a 400 ValidationException error.

  • In ISO 8601 format: YYYY-MM-DDThh:mm:ss.sssZ. For example, 2020–07-2T12:15:20.000Z+01:00

Source

pub fn set_departure_time(self, input: Option<DateTime>) -> Self

Specifies the desired time of departure. Uses the given time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Setting a departure time in the past returns a 400 ValidationException error.

  • In ISO 8601 format: YYYY-MM-DDThh:mm:ss.sssZ. For example, 2020–07-2T12:15:20.000Z+01:00

Source

pub fn get_departure_time(&self) -> &Option<DateTime>

Specifies the desired time of departure. Uses the given time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Setting a departure time in the past returns a 400 ValidationException error.

  • In ISO 8601 format: YYYY-MM-DDThh:mm:ss.sssZ. For example, 2020–07-2T12:15:20.000Z+01:00

Source

pub fn depart_now(self, input: bool) -> Self

Sets the time of departure as the current time. Uses the current time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Default Value: false

Valid Values: false | true

Source

pub fn set_depart_now(self, input: Option<bool>) -> Self

Sets the time of departure as the current time. Uses the current time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Default Value: false

Valid Values: false | true

Source

pub fn get_depart_now(&self) -> &Option<bool>

Sets the time of departure as the current time. Uses the current time to calculate the route matrix. You can't set both DepartureTime and DepartNow. If neither is set, the best time of day to travel with the best traffic conditions is used to calculate the route matrix.

Default Value: false

Valid Values: false | true

Source

pub fn distance_unit(self, input: DistanceUnit) -> Self

Set the unit system to specify the distance.

Default Value: Kilometers

Source

pub fn set_distance_unit(self, input: Option<DistanceUnit>) -> Self

Set the unit system to specify the distance.

Default Value: Kilometers

Source

pub fn get_distance_unit(&self) -> &Option<DistanceUnit>

Set the unit system to specify the distance.

Default Value: Kilometers

Source

pub fn car_mode_options(self, input: CalculateRouteCarModeOptions) -> Self

Specifies route preferences when traveling by Car, such as avoiding routes that use ferries or tolls.

Requirements: TravelMode must be specified as Car.

Source

pub fn set_car_mode_options( self, input: Option<CalculateRouteCarModeOptions>, ) -> Self

Specifies route preferences when traveling by Car, such as avoiding routes that use ferries or tolls.

Requirements: TravelMode must be specified as Car.

Source

pub fn get_car_mode_options(&self) -> &Option<CalculateRouteCarModeOptions>

Specifies route preferences when traveling by Car, such as avoiding routes that use ferries or tolls.

Requirements: TravelMode must be specified as Car.

Source

pub fn truck_mode_options(self, input: CalculateRouteTruckModeOptions) -> Self

Specifies route preferences when traveling by Truck, such as avoiding routes that use ferries or tolls, and truck specifications to consider when choosing an optimal road.

Requirements: TravelMode must be specified as Truck.

Source

pub fn set_truck_mode_options( self, input: Option<CalculateRouteTruckModeOptions>, ) -> Self

Specifies route preferences when traveling by Truck, such as avoiding routes that use ferries or tolls, and truck specifications to consider when choosing an optimal road.

Requirements: TravelMode must be specified as Truck.

Source

pub fn get_truck_mode_options(&self) -> &Option<CalculateRouteTruckModeOptions>

Specifies route preferences when traveling by Truck, such as avoiding routes that use ferries or tolls, and truck specifications to consider when choosing an optimal road.

Requirements: TravelMode must be specified as Truck.

Source

pub fn key(self, input: impl Into<String>) -> Self

The optional API key to authorize the request.

Source

pub fn set_key(self, input: Option<String>) -> Self

The optional API key to authorize the request.

Source

pub fn get_key(&self) -> &Option<String>

The optional API key to authorize the request.

Trait Implementations§

Source§

impl Clone for CalculateRouteMatrixFluentBuilder

Source§

fn clone(&self) -> CalculateRouteMatrixFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CalculateRouteMatrixFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more