aws_sdk_kendra/operation/start_data_source_sync_job/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::start_data_source_sync_job::_start_data_source_sync_job_output::StartDataSourceSyncJobOutputBuilder;
3
4pub use crate::operation::start_data_source_sync_job::_start_data_source_sync_job_input::StartDataSourceSyncJobInputBuilder;
5
6impl crate::operation::start_data_source_sync_job::builders::StartDataSourceSyncJobInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::start_data_source_sync_job::StartDataSourceSyncJobError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.start_data_source_sync_job();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `StartDataSourceSyncJob`.
24///
25/// <p>Starts a synchronization job for a data source connector. If a synchronization job is already in progress, Amazon Kendra returns a <code>ResourceInUseException</code> exception.</p>
26/// <p>Re-syncing your data source with your index after modifying, adding, or deleting documents from your data source respository could take up to an hour or more, depending on the number of documents to sync.</p>
27#[derive(::std::clone::Clone, ::std::fmt::Debug)]
28pub struct StartDataSourceSyncJobFluentBuilder {
29    handle: ::std::sync::Arc<crate::client::Handle>,
30    inner: crate::operation::start_data_source_sync_job::builders::StartDataSourceSyncJobInputBuilder,
31    config_override: ::std::option::Option<crate::config::Builder>,
32}
33impl
34    crate::client::customize::internal::CustomizableSend<
35        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobOutput,
36        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobError,
37    > for StartDataSourceSyncJobFluentBuilder
38{
39    fn send(
40        self,
41        config_override: crate::config::Builder,
42    ) -> crate::client::customize::internal::BoxFuture<
43        crate::client::customize::internal::SendResult<
44            crate::operation::start_data_source_sync_job::StartDataSourceSyncJobOutput,
45            crate::operation::start_data_source_sync_job::StartDataSourceSyncJobError,
46        >,
47    > {
48        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
49    }
50}
51impl StartDataSourceSyncJobFluentBuilder {
52    /// Creates a new `StartDataSourceSyncJobFluentBuilder`.
53    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
54        Self {
55            handle,
56            inner: ::std::default::Default::default(),
57            config_override: ::std::option::Option::None,
58        }
59    }
60    /// Access the StartDataSourceSyncJob as a reference.
61    pub fn as_input(&self) -> &crate::operation::start_data_source_sync_job::builders::StartDataSourceSyncJobInputBuilder {
62        &self.inner
63    }
64    /// Sends the request and returns the response.
65    ///
66    /// If an error occurs, an `SdkError` will be returned with additional details that
67    /// can be matched against.
68    ///
69    /// By default, any retryable failures will be retried twice. Retry behavior
70    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
71    /// set when configuring the client.
72    pub async fn send(
73        self,
74    ) -> ::std::result::Result<
75        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobOutput,
76        ::aws_smithy_runtime_api::client::result::SdkError<
77            crate::operation::start_data_source_sync_job::StartDataSourceSyncJobError,
78            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
79        >,
80    > {
81        let input = self
82            .inner
83            .build()
84            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
85        let runtime_plugins = crate::operation::start_data_source_sync_job::StartDataSourceSyncJob::operation_runtime_plugins(
86            self.handle.runtime_plugins.clone(),
87            &self.handle.conf,
88            self.config_override,
89        );
90        crate::operation::start_data_source_sync_job::StartDataSourceSyncJob::orchestrate(&runtime_plugins, input).await
91    }
92
93    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
94    pub fn customize(
95        self,
96    ) -> crate::client::customize::CustomizableOperation<
97        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobOutput,
98        crate::operation::start_data_source_sync_job::StartDataSourceSyncJobError,
99        Self,
100    > {
101        crate::client::customize::CustomizableOperation::new(self)
102    }
103    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
104        self.set_config_override(::std::option::Option::Some(config_override.into()));
105        self
106    }
107
108    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
109        self.config_override = config_override;
110        self
111    }
112    /// <p>The identifier of the data source connector to synchronize.</p>
113    pub fn id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
114        self.inner = self.inner.id(input.into());
115        self
116    }
117    /// <p>The identifier of the data source connector to synchronize.</p>
118    pub fn set_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
119        self.inner = self.inner.set_id(input);
120        self
121    }
122    /// <p>The identifier of the data source connector to synchronize.</p>
123    pub fn get_id(&self) -> &::std::option::Option<::std::string::String> {
124        self.inner.get_id()
125    }
126    /// <p>The identifier of the index used with the data source connector.</p>
127    pub fn index_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
128        self.inner = self.inner.index_id(input.into());
129        self
130    }
131    /// <p>The identifier of the index used with the data source connector.</p>
132    pub fn set_index_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
133        self.inner = self.inner.set_index_id(input);
134        self
135    }
136    /// <p>The identifier of the index used with the data source connector.</p>
137    pub fn get_index_id(&self) -> &::std::option::Option<::std::string::String> {
138        self.inner.get_index_id()
139    }
140}
aws_sdk_kendra/operation/start_data_source_sync_job/builders.rs

aws_sdk_kendra/operation/start_data_source_sync_job/
builders.rs
