pub struct InviteMembersFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to InviteMembers.
Invites Amazon Web Services accounts to become members of an organization administered by the Amazon Web Services account that invokes this API. If you are using Amazon Web Services Organizations to manage your GuardDuty environment, this step is not needed. For more information, see Managing accounts with organizations.
To invite Amazon Web Services accounts, the first step is to ensure that GuardDuty has been enabled in the potential member accounts. You can now invoke this API to add accounts by invitation. The invited accounts can either accept or decline the invitation from their GuardDuty accounts. Each invited Amazon Web Services account can choose to accept the invitation from only one Amazon Web Services account. For more information, see Managing GuardDuty accounts by invitation.
After the invite has been accepted and you choose to disassociate a member account (by using DisassociateMembers) from your account, the details of the member account obtained by invoking CreateMembers, including the associated email addresses, will be retained. This is done so that you can invoke InviteMembers without the need to invoke CreateMembers again. To remove the details associated with a member account, you must also invoke DeleteMembers.
If you disassociate a member account that was added by invitation, the member account details obtained from this API, including the associated email addresses, will be retained. This is done so that the delegated administrator can invoke the InviteMembers API without the need to invoke the CreateMembers API again. To remove the details associated with a member account, the delegated administrator must invoke the DeleteMembers API.
When the member accounts added through Organizations are later disassociated, you (administrator) can't invite them by calling the InviteMembers API. You can create an association with these member accounts again only by calling the CreateMembers API.
Implementations§
Source§impl InviteMembersFluentBuilder
impl InviteMembersFluentBuilder
Sourcepub fn as_input(&self) -> &InviteMembersInputBuilder
pub fn as_input(&self) -> &InviteMembersInputBuilder
Access the InviteMembers as a reference.
Sourcepub async fn send(
self,
) -> Result<InviteMembersOutput, SdkError<InviteMembersError, HttpResponse>>
pub async fn send( self, ) -> Result<InviteMembersOutput, SdkError<InviteMembersError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<InviteMembersOutput, InviteMembersError, Self>
pub fn customize( self, ) -> CustomizableOperation<InviteMembersOutput, InviteMembersError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn detector_id(self, input: impl Into<String>) -> Self
pub fn detector_id(self, input: impl Into<String>) -> Self
The unique ID of the detector of the GuardDuty account with which you want to invite members.
To find the detectorId in the current Region, see the Settings page in the GuardDuty console, or run the ListDetectors API.
Sourcepub fn set_detector_id(self, input: Option<String>) -> Self
pub fn set_detector_id(self, input: Option<String>) -> Self
The unique ID of the detector of the GuardDuty account with which you want to invite members.
To find the detectorId in the current Region, see the Settings page in the GuardDuty console, or run the ListDetectors API.
Sourcepub fn get_detector_id(&self) -> &Option<String>
pub fn get_detector_id(&self) -> &Option<String>
The unique ID of the detector of the GuardDuty account with which you want to invite members.
To find the detectorId in the current Region, see the Settings page in the GuardDuty console, or run the ListDetectors API.
Sourcepub fn account_ids(self, input: impl Into<String>) -> Self
pub fn account_ids(self, input: impl Into<String>) -> Self
Appends an item to AccountIds.
To override the contents of this collection use set_account_ids.
A list of account IDs of the accounts that you want to invite to GuardDuty as members.
Sourcepub fn set_account_ids(self, input: Option<Vec<String>>) -> Self
pub fn set_account_ids(self, input: Option<Vec<String>>) -> Self
A list of account IDs of the accounts that you want to invite to GuardDuty as members.
Sourcepub fn get_account_ids(&self) -> &Option<Vec<String>>
pub fn get_account_ids(&self) -> &Option<Vec<String>>
A list of account IDs of the accounts that you want to invite to GuardDuty as members.
Sourcepub fn disable_email_notification(self, input: bool) -> Self
pub fn disable_email_notification(self, input: bool) -> Self
A Boolean value that specifies whether you want to disable email notification to the accounts that you are inviting to GuardDuty as members.
Sourcepub fn set_disable_email_notification(self, input: Option<bool>) -> Self
pub fn set_disable_email_notification(self, input: Option<bool>) -> Self
A Boolean value that specifies whether you want to disable email notification to the accounts that you are inviting to GuardDuty as members.
Sourcepub fn get_disable_email_notification(&self) -> &Option<bool>
pub fn get_disable_email_notification(&self) -> &Option<bool>
A Boolean value that specifies whether you want to disable email notification to the accounts that you are inviting to GuardDuty as members.
Sourcepub fn message(self, input: impl Into<String>) -> Self
pub fn message(self, input: impl Into<String>) -> Self
The invitation message that you want to send to the accounts that you're inviting to GuardDuty as members.
Sourcepub fn set_message(self, input: Option<String>) -> Self
pub fn set_message(self, input: Option<String>) -> Self
The invitation message that you want to send to the accounts that you're inviting to GuardDuty as members.
Sourcepub fn get_message(&self) -> &Option<String>
pub fn get_message(&self) -> &Option<String>
The invitation message that you want to send to the accounts that you're inviting to GuardDuty as members.
Trait Implementations§
Source§impl Clone for InviteMembersFluentBuilder
impl Clone for InviteMembersFluentBuilder
Source§fn clone(&self) -> InviteMembersFluentBuilder
fn clone(&self) -> InviteMembersFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for InviteMembersFluentBuilder
impl !RefUnwindSafe for InviteMembersFluentBuilder
impl Send for InviteMembersFluentBuilder
impl Sync for InviteMembersFluentBuilder
impl Unpin for InviteMembersFluentBuilder
impl !UnwindSafe for InviteMembersFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);