// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::describe_addon_versions::_describe_addon_versions_output::DescribeAddonVersionsOutputBuilder;

pub use crate::operation::describe_addon_versions::_describe_addon_versions_input::DescribeAddonVersionsInputBuilder;

impl crate::operation::describe_addon_versions::builders::DescribeAddonVersionsInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::describe_addon_versions::DescribeAddonVersionsOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::describe_addon_versions::DescribeAddonVersionsError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.describe_addon_versions();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `DescribeAddonVersions`.
///
/// <p>Describes the versions for an add-on.</p>
/// <p>Information such as the Kubernetes versions that you can use the add-on with, the <code>owner</code>, <code>publisher</code>, and the <code>type</code> of the add-on are returned.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct DescribeAddonVersionsFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::describe_addon_versions::builders::DescribeAddonVersionsInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::describe_addon_versions::DescribeAddonVersionsOutput,
        crate::operation::describe_addon_versions::DescribeAddonVersionsError,
    > for DescribeAddonVersionsFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::describe_addon_versions::DescribeAddonVersionsOutput,
            crate::operation::describe_addon_versions::DescribeAddonVersionsError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl DescribeAddonVersionsFluentBuilder {
    /// Creates a new `DescribeAddonVersionsFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the DescribeAddonVersions as a reference.
    pub fn as_input(&self) -> &crate::operation::describe_addon_versions::builders::DescribeAddonVersionsInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::describe_addon_versions::DescribeAddonVersionsOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::describe_addon_versions::DescribeAddonVersionsError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::describe_addon_versions::DescribeAddonVersions::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::describe_addon_versions::DescribeAddonVersions::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::describe_addon_versions::DescribeAddonVersionsOutput,
        crate::operation::describe_addon_versions::DescribeAddonVersionsError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// Create a paginator for this request
    ///
    /// Paginators are used by calling [`send().await`](crate::operation::describe_addon_versions::paginator::DescribeAddonVersionsPaginator::send) which returns a [`PaginationStream`](aws_smithy_async::future::pagination_stream::PaginationStream).
    pub fn into_paginator(self) -> crate::operation::describe_addon_versions::paginator::DescribeAddonVersionsPaginator {
        crate::operation::describe_addon_versions::paginator::DescribeAddonVersionsPaginator::new(self.handle, self.inner)
    }
    /// <p>The Kubernetes versions that you can use the add-on with.</p>
    pub fn kubernetes_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.kubernetes_version(input.into());
        self
    }
    /// <p>The Kubernetes versions that you can use the add-on with.</p>
    pub fn set_kubernetes_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_kubernetes_version(input);
        self
    }
    /// <p>The Kubernetes versions that you can use the add-on with.</p>
    pub fn get_kubernetes_version(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_kubernetes_version()
    }
    /// <p>The maximum number of results, returned in paginated output. You receive <code>maxResults</code> in a single page, along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, 100 results and a <code>nextToken</code> value, if applicable, are returned.</p>
    pub fn max_results(mut self, input: i32) -> Self {
        self.inner = self.inner.max_results(input);
        self
    }
    /// <p>The maximum number of results, returned in paginated output. You receive <code>maxResults</code> in a single page, along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, 100 results and a <code>nextToken</code> value, if applicable, are returned.</p>
    pub fn set_max_results(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_max_results(input);
        self
    }
    /// <p>The maximum number of results, returned in paginated output. You receive <code>maxResults</code> in a single page, along with a <code>nextToken</code> response element. You can see the remaining results of the initial request by sending another request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If you don't use this parameter, 100 results and a <code>nextToken</code> value, if applicable, are returned.</p>
    pub fn get_max_results(&self) -> &::std::option::Option<i32> {
        self.inner.get_max_results()
    }
    /// <p>The <code>nextToken</code> value returned from a previous paginated request, where <code>maxResults</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value. This value is null when there are no more results to return.</p><note>
    /// <p>This token should be treated as an opaque identifier that is used only to retrieve the next items in a list and not for other programmatic purposes.</p>
    /// </note>
    pub fn next_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.next_token(input.into());
        self
    }
    /// <p>The <code>nextToken</code> value returned from a previous paginated request, where <code>maxResults</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value. This value is null when there are no more results to return.</p><note>
    /// <p>This token should be treated as an opaque identifier that is used only to retrieve the next items in a list and not for other programmatic purposes.</p>
    /// </note>
    pub fn set_next_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_next_token(input);
        self
    }
    /// <p>The <code>nextToken</code> value returned from a previous paginated request, where <code>maxResults</code> was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the <code>nextToken</code> value. This value is null when there are no more results to return.</p><note>
    /// <p>This token should be treated as an opaque identifier that is used only to retrieve the next items in a list and not for other programmatic purposes.</p>
    /// </note>
    pub fn get_next_token(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_next_token()
    }
    /// <p>The name of the add-on. The name must match one of the names returned by <a href="https://docs.aws.amazon.com/eks/latest/APIReference/API_ListAddons.html"> <code>ListAddons</code> </a>.</p>
    pub fn addon_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.addon_name(input.into());
        self
    }
    /// <p>The name of the add-on. The name must match one of the names returned by <a href="https://docs.aws.amazon.com/eks/latest/APIReference/API_ListAddons.html"> <code>ListAddons</code> </a>.</p>
    pub fn set_addon_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_addon_name(input);
        self
    }
    /// <p>The name of the add-on. The name must match one of the names returned by <a href="https://docs.aws.amazon.com/eks/latest/APIReference/API_ListAddons.html"> <code>ListAddons</code> </a>.</p>
    pub fn get_addon_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_addon_name()
    }
    ///
    /// Appends an item to `types`.
    ///
    /// To override the contents of this collection use [`set_types`](Self::set_types).
    ///
    /// <p>The type of the add-on. For valid <code>types</code>, don't specify a value for this property.</p>
    pub fn types(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.types(input.into());
        self
    }
    /// <p>The type of the add-on. For valid <code>types</code>, don't specify a value for this property.</p>
    pub fn set_types(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_types(input);
        self
    }
    /// <p>The type of the add-on. For valid <code>types</code>, don't specify a value for this property.</p>
    pub fn get_types(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_types()
    }
    ///
    /// Appends an item to `publishers`.
    ///
    /// To override the contents of this collection use [`set_publishers`](Self::set_publishers).
    ///
    /// <p>The publisher of the add-on. For valid <code>publishers</code>, don't specify a value for this property.</p>
    pub fn publishers(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.publishers(input.into());
        self
    }
    /// <p>The publisher of the add-on. For valid <code>publishers</code>, don't specify a value for this property.</p>
    pub fn set_publishers(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_publishers(input);
        self
    }
    /// <p>The publisher of the add-on. For valid <code>publishers</code>, don't specify a value for this property.</p>
    pub fn get_publishers(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_publishers()
    }
    ///
    /// Appends an item to `owners`.
    ///
    /// To override the contents of this collection use [`set_owners`](Self::set_owners).
    ///
    /// <p>The owner of the add-on. For valid <code>owners</code>, don't specify a value for this property.</p>
    pub fn owners(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.owners(input.into());
        self
    }
    /// <p>The owner of the add-on. For valid <code>owners</code>, don't specify a value for this property.</p>
    pub fn set_owners(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_owners(input);
        self
    }
    /// <p>The owner of the add-on. For valid <code>owners</code>, don't specify a value for this property.</p>
    pub fn get_owners(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_owners()
    }
}