aws_sdk_directconnect/operation/create_bgp_peer/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::create_bgp_peer::_create_bgp_peer_output::CreateBgpPeerOutputBuilder;
3
4pub use crate::operation::create_bgp_peer::_create_bgp_peer_input::CreateBgpPeerInputBuilder;
5
6impl crate::operation::create_bgp_peer::builders::CreateBgpPeerInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::create_bgp_peer::CreateBgpPeerOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::create_bgp_peer::CreateBGPPeerError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.create_bgp_peer();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `CreateBGPPeer`.
24///
25/// <p>Creates a BGP peer on the specified virtual interface.</p>
26/// <p>You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.</p>
27/// <p>If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.</p>
28/// <p>When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.</p><important>
29/// <p>If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see <a href="https://datatracker.ietf.org/doc/html/rfc1918"> Address Allocation for Private Internets</a>.</p>
30/// </important>
31/// <p>For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.</p>
32#[derive(::std::clone::Clone, ::std::fmt::Debug)]
33pub struct CreateBGPPeerFluentBuilder {
34    handle: ::std::sync::Arc<crate::client::Handle>,
35    inner: crate::operation::create_bgp_peer::builders::CreateBgpPeerInputBuilder,
36    config_override: ::std::option::Option<crate::config::Builder>,
37}
38impl
39    crate::client::customize::internal::CustomizableSend<
40        crate::operation::create_bgp_peer::CreateBgpPeerOutput,
41        crate::operation::create_bgp_peer::CreateBGPPeerError,
42    > for CreateBGPPeerFluentBuilder
43{
44    fn send(
45        self,
46        config_override: crate::config::Builder,
47    ) -> crate::client::customize::internal::BoxFuture<
48        crate::client::customize::internal::SendResult<
49            crate::operation::create_bgp_peer::CreateBgpPeerOutput,
50            crate::operation::create_bgp_peer::CreateBGPPeerError,
51        >,
52    > {
53        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
54    }
55}
56impl CreateBGPPeerFluentBuilder {
57    /// Creates a new `CreateBGPPeerFluentBuilder`.
58    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
59        Self {
60            handle,
61            inner: ::std::default::Default::default(),
62            config_override: ::std::option::Option::None,
63        }
64    }
65    /// Access the CreateBGPPeer as a reference.
66    pub fn as_input(&self) -> &crate::operation::create_bgp_peer::builders::CreateBgpPeerInputBuilder {
67        &self.inner
68    }
69    /// Sends the request and returns the response.
70    ///
71    /// If an error occurs, an `SdkError` will be returned with additional details that
72    /// can be matched against.
73    ///
74    /// By default, any retryable failures will be retried twice. Retry behavior
75    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
76    /// set when configuring the client.
77    pub async fn send(
78        self,
79    ) -> ::std::result::Result<
80        crate::operation::create_bgp_peer::CreateBgpPeerOutput,
81        ::aws_smithy_runtime_api::client::result::SdkError<
82            crate::operation::create_bgp_peer::CreateBGPPeerError,
83            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
84        >,
85    > {
86        let input = self
87            .inner
88            .build()
89            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
90        let runtime_plugins = crate::operation::create_bgp_peer::CreateBGPPeer::operation_runtime_plugins(
91            self.handle.runtime_plugins.clone(),
92            &self.handle.conf,
93            self.config_override,
94        );
95        crate::operation::create_bgp_peer::CreateBGPPeer::orchestrate(&runtime_plugins, input).await
96    }
97
98    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
99    pub fn customize(
100        self,
101    ) -> crate::client::customize::CustomizableOperation<
102        crate::operation::create_bgp_peer::CreateBgpPeerOutput,
103        crate::operation::create_bgp_peer::CreateBGPPeerError,
104        Self,
105    > {
106        crate::client::customize::CustomizableOperation::new(self)
107    }
108    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
109        self.set_config_override(::std::option::Option::Some(config_override.into()));
110        self
111    }
112
113    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
114        self.config_override = config_override;
115        self
116    }
117    /// <p>The ID of the virtual interface.</p>
118    pub fn virtual_interface_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
119        self.inner = self.inner.virtual_interface_id(input.into());
120        self
121    }
122    /// <p>The ID of the virtual interface.</p>
123    pub fn set_virtual_interface_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
124        self.inner = self.inner.set_virtual_interface_id(input);
125        self
126    }
127    /// <p>The ID of the virtual interface.</p>
128    pub fn get_virtual_interface_id(&self) -> &::std::option::Option<::std::string::String> {
129        self.inner.get_virtual_interface_id()
130    }
131    /// <p>Information about the BGP peer.</p>
132    pub fn new_bgp_peer(mut self, input: crate::types::NewBgpPeer) -> Self {
133        self.inner = self.inner.new_bgp_peer(input);
134        self
135    }
136    /// <p>Information about the BGP peer.</p>
137    pub fn set_new_bgp_peer(mut self, input: ::std::option::Option<crate::types::NewBgpPeer>) -> Self {
138        self.inner = self.inner.set_new_bgp_peer(input);
139        self
140    }
141    /// <p>Information about the BGP peer.</p>
142    pub fn get_new_bgp_peer(&self) -> &::std::option::Option<crate::types::NewBgpPeer> {
143        self.inner.get_new_bgp_peer()
144    }
145}
aws_sdk_directconnect/operation/create_bgp_peer/builders.rs

aws_sdk_directconnect/operation/create_bgp_peer/
builders.rs
