pub struct ListQueriesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListQueries.
Returns a list of queries and query statuses for the past seven days. You must specify an ARN value for EventDataStore. Optionally, to shorten the list of results, you can specify a time range, formatted as timestamps, by adding StartTime and EndTime parameters, and a QueryStatus value. Valid values for QueryStatus include QUEUED, RUNNING, FINISHED, FAILED, TIMED_OUT, or CANCELLED.
Implementations§
Source§impl ListQueriesFluentBuilder
impl ListQueriesFluentBuilder
Sourcepub fn as_input(&self) -> &ListQueriesInputBuilder
pub fn as_input(&self) -> &ListQueriesInputBuilder
Access the ListQueries as a reference.
Sourcepub async fn send(
self,
) -> Result<ListQueriesOutput, SdkError<ListQueriesError, HttpResponse>>
pub async fn send( self, ) -> Result<ListQueriesOutput, SdkError<ListQueriesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListQueriesOutput, ListQueriesError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListQueriesOutput, ListQueriesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> ListQueriesPaginator
pub fn into_paginator(self) -> ListQueriesPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn event_data_store(self, input: impl Into<String>) -> Self
pub fn event_data_store(self, input: impl Into<String>) -> Self
The ARN (or the ID suffix of the ARN) of an event data store on which queries were run.
Sourcepub fn set_event_data_store(self, input: Option<String>) -> Self
pub fn set_event_data_store(self, input: Option<String>) -> Self
The ARN (or the ID suffix of the ARN) of an event data store on which queries were run.
Sourcepub fn get_event_data_store(&self) -> &Option<String>
pub fn get_event_data_store(&self) -> &Option<String>
The ARN (or the ID suffix of the ARN) of an event data store on which queries were run.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
A token you can use to get the next page of results.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
A token you can use to get the next page of results.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
A token you can use to get the next page of results.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of queries to show on a page.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of queries to show on a page.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of queries to show on a page.
Sourcepub fn start_time(self, input: DateTime) -> Self
pub fn start_time(self, input: DateTime) -> Self
Use with EndTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn set_start_time(self, input: Option<DateTime>) -> Self
pub fn set_start_time(self, input: Option<DateTime>) -> Self
Use with EndTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn get_start_time(&self) -> &Option<DateTime>
pub fn get_start_time(&self) -> &Option<DateTime>
Use with EndTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn end_time(self, input: DateTime) -> Self
pub fn end_time(self, input: DateTime) -> Self
Use with StartTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn set_end_time(self, input: Option<DateTime>) -> Self
pub fn set_end_time(self, input: Option<DateTime>) -> Self
Use with StartTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn get_end_time(&self) -> &Option<DateTime>
pub fn get_end_time(&self) -> &Option<DateTime>
Use with StartTime to bound a ListQueries request, and limit its results to only those queries run within a specified time period.
Sourcepub fn query_status(self, input: QueryStatus) -> Self
pub fn query_status(self, input: QueryStatus) -> Self
The status of queries that you want to return in results. Valid values for QueryStatus include QUEUED, RUNNING, FINISHED, FAILED, TIMED_OUT, or CANCELLED.
Sourcepub fn set_query_status(self, input: Option<QueryStatus>) -> Self
pub fn set_query_status(self, input: Option<QueryStatus>) -> Self
The status of queries that you want to return in results. Valid values for QueryStatus include QUEUED, RUNNING, FINISHED, FAILED, TIMED_OUT, or CANCELLED.
Sourcepub fn get_query_status(&self) -> &Option<QueryStatus>
pub fn get_query_status(&self) -> &Option<QueryStatus>
The status of queries that you want to return in results. Valid values for QueryStatus include QUEUED, RUNNING, FINISHED, FAILED, TIMED_OUT, or CANCELLED.
Trait Implementations§
Source§impl Clone for ListQueriesFluentBuilder
impl Clone for ListQueriesFluentBuilder
Source§fn clone(&self) -> ListQueriesFluentBuilder
fn clone(&self) -> ListQueriesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListQueriesFluentBuilder
impl !RefUnwindSafe for ListQueriesFluentBuilder
impl Send for ListQueriesFluentBuilder
impl Sync for ListQueriesFluentBuilder
impl Unpin for ListQueriesFluentBuilder
impl !UnwindSafe for ListQueriesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);