#[non_exhaustive]pub struct CreateAutoScalingGroupInput { /* private fields */ }Implementations§
source§impl CreateAutoScalingGroupInput
impl CreateAutoScalingGroupInput
sourcepub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateAutoScalingGroup, AwsResponseRetryClassifier>, BuildError>
pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<CreateAutoScalingGroup, AwsResponseRetryClassifier>, BuildError>
Consumes the builder and constructs an Operation<CreateAutoScalingGroup>
Examples found in repository?
1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::CreateAutoScalingGroup,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::CreateAutoScalingGroupError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::CreateAutoScalingGroupOutput,
aws_smithy_http::result::SdkError<crate::error::CreateAutoScalingGroupError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture CreateAutoScalingGroupInput.
source§impl CreateAutoScalingGroupInput
impl CreateAutoScalingGroupInput
sourcepub fn auto_scaling_group_name(&self) -> Option<&str>
pub fn auto_scaling_group_name(&self) -> Option<&str>
The name of the Auto Scaling group. This name must be unique per Region per account.
sourcepub fn launch_configuration_name(&self) -> Option<&str>
pub fn launch_configuration_name(&self) -> Option<&str>
The name of the launch configuration to use to launch instances.
Conditional: You must specify either a launch template (LaunchTemplate or MixedInstancesPolicy) or a launch configuration (LaunchConfigurationName or InstanceId).
sourcepub fn launch_template(&self) -> Option<&LaunchTemplateSpecification>
pub fn launch_template(&self) -> Option<&LaunchTemplateSpecification>
Information used to specify the launch template and version to use to launch instances.
Conditional: You must specify either a launch template (LaunchTemplate or MixedInstancesPolicy) or a launch configuration (LaunchConfigurationName or InstanceId).
The launch template that is specified must be configured for use with an Auto Scaling group. For more information, see Creating a launch template for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn mixed_instances_policy(&self) -> Option<&MixedInstancesPolicy>
pub fn mixed_instances_policy(&self) -> Option<&MixedInstancesPolicy>
An embedded object that specifies a mixed instances policy.
For more information, see Auto Scaling groups with multiple instance types and purchase options in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn instance_id(&self) -> Option<&str>
pub fn instance_id(&self) -> Option<&str>
The ID of the instance used to base the launch configuration on. If specified, Amazon EC2 Auto Scaling uses the configuration values from the specified instance to create a new launch configuration. To get the instance ID, use the Amazon EC2 DescribeInstances API operation. For more information, see Creating an Auto Scaling group using an EC2 instance in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn max_size(&self) -> Option<i32>
pub fn max_size(&self) -> Option<i32>
The maximum size of the group.
With a mixed instances policy that uses instance weighting, Amazon EC2 Auto Scaling may need to go above MaxSize to meet your capacity requirements. In this event, Amazon EC2 Auto Scaling will never go above MaxSize by more than your largest instance weight (weights that define how many units each instance contributes to the desired capacity of the group).
sourcepub fn desired_capacity(&self) -> Option<i32>
pub fn desired_capacity(&self) -> Option<i32>
The desired capacity is the initial capacity of the Auto Scaling group at the time of its creation and the capacity it attempts to maintain. It can scale beyond this capacity if you configure auto scaling. This number must be greater than or equal to the minimum size of the group and less than or equal to the maximum size of the group. If you do not specify a desired capacity, the default is the minimum size of the group.
sourcepub fn default_cooldown(&self) -> Option<i32>
pub fn default_cooldown(&self) -> Option<i32>
Only needed if you use simple scaling policies.
The amount of time, in seconds, between one scaling activity ending and another one starting due to simple scaling policies. For more information, see Scaling cooldowns for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
Default: 300 seconds
sourcepub fn availability_zones(&self) -> Option<&[String]>
pub fn availability_zones(&self) -> Option<&[String]>
A list of Availability Zones where instances in the Auto Scaling group can be created. Used for launching into the default VPC subnet in each Availability Zone when not using the VPCZoneIdentifier property, or for attaching a network interface when an existing network interface ID is specified in a launch template.
sourcepub fn load_balancer_names(&self) -> Option<&[String]>
pub fn load_balancer_names(&self) -> Option<&[String]>
A list of Classic Load Balancers associated with this Auto Scaling group. For Application Load Balancers, Network Load Balancers, and Gateway Load Balancer, specify the TargetGroupARNs property instead.
sourcepub fn target_group_ar_ns(&self) -> Option<&[String]>
pub fn target_group_ar_ns(&self) -> Option<&[String]>
The Amazon Resource Names (ARN) of the target groups to associate with the Auto Scaling group. Instances are registered as targets with the target groups. The target groups receive incoming traffic and route requests to one or more registered targets. For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn health_check_type(&self) -> Option<&str>
pub fn health_check_type(&self) -> Option<&str>
The service to use for the health checks. The valid values are EC2 (default) and ELB. If you configure an Auto Scaling group to use load balancer (ELB) health checks, it considers the instance unhealthy if it fails either the EC2 status checks or the load balancer health checks. For more information, see Health checks for Auto Scaling instances in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn health_check_grace_period(&self) -> Option<i32>
pub fn health_check_grace_period(&self) -> Option<i32>
The amount of time, in seconds, that Amazon EC2 Auto Scaling waits before checking the health status of an EC2 instance that has come into service and marking it unhealthy due to a failed Elastic Load Balancing or custom health check. This is useful if your instances do not immediately pass these health checks after they enter the InService state. For more information, see Health check grace period in the Amazon EC2 Auto Scaling User Guide.
Default: 0 seconds
sourcepub fn placement_group(&self) -> Option<&str>
pub fn placement_group(&self) -> Option<&str>
The name of the placement group into which to launch your instances. For more information, see Placement groups in the Amazon EC2 User Guide for Linux Instances.
A cluster placement group is a logical grouping of instances within a single Availability Zone. You cannot specify multiple Availability Zones and a cluster placement group.
sourcepub fn vpc_zone_identifier(&self) -> Option<&str>
pub fn vpc_zone_identifier(&self) -> Option<&str>
A comma-separated list of subnet IDs for a virtual private cloud (VPC) where instances in the Auto Scaling group can be created. If you specify VPCZoneIdentifier with AvailabilityZones, the subnets that you specify must reside in those Availability Zones.
sourcepub fn termination_policies(&self) -> Option<&[String]>
pub fn termination_policies(&self) -> Option<&[String]>
A policy or a list of policies that are used to select the instance to terminate. These policies are executed in the order that you list them. For more information, see Work with Amazon EC2 Auto Scaling termination policies in the Amazon EC2 Auto Scaling User Guide.
Valid values: Default | AllocationStrategy | ClosestToNextInstanceHour | NewestInstance | OldestInstance | OldestLaunchConfiguration | OldestLaunchTemplate | arn:aws:lambda:region:account-id:function:my-function:my-alias
sourcepub fn new_instances_protected_from_scale_in(&self) -> Option<bool>
pub fn new_instances_protected_from_scale_in(&self) -> Option<bool>
Indicates whether newly launched instances are protected from termination by Amazon EC2 Auto Scaling when scaling in. For more information about preventing instances from terminating on scale in, see Using instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn capacity_rebalance(&self) -> Option<bool>
pub fn capacity_rebalance(&self) -> Option<bool>
Indicates whether Capacity Rebalancing is enabled. Otherwise, Capacity Rebalancing is disabled. When you turn on Capacity Rebalancing, Amazon EC2 Auto Scaling attempts to launch a Spot Instance whenever Amazon EC2 notifies that a Spot Instance is at an elevated risk of interruption. After launching a new instance, it then terminates an old instance. For more information, see Use Capacity Rebalancing to handle Amazon EC2 Spot Interruptions in the in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn lifecycle_hook_specification_list(
&self
) -> Option<&[LifecycleHookSpecification]>
pub fn lifecycle_hook_specification_list(
&self
) -> Option<&[LifecycleHookSpecification]>
One or more lifecycle hooks to add to the Auto Scaling group before instances are launched.
One or more tags. You can tag your Auto Scaling group and propagate the tags to the Amazon EC2 instances it launches. Tags are not propagated to Amazon EBS volumes. To add tags to Amazon EBS volumes, specify the tags in a launch template but use caution. If the launch template specifies an instance tag with a key that is also specified for the Auto Scaling group, Amazon EC2 Auto Scaling overrides the value of that instance tag with the value specified by the Auto Scaling group. For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn service_linked_role_arn(&self) -> Option<&str>
pub fn service_linked_role_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the service-linked role that the Auto Scaling group uses to call other Amazon Web Services service on your behalf. By default, Amazon EC2 Auto Scaling uses a service-linked role named AWSServiceRoleForAutoScaling, which it creates if it does not exist. For more information, see Service-linked roles in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn max_instance_lifetime(&self) -> Option<i32>
pub fn max_instance_lifetime(&self) -> Option<i32>
The maximum amount of time, in seconds, that an instance can be in service. The default is null. If specified, the value must be either 0 or a number equal to or greater than 86,400 seconds (1 day). For more information, see Replacing Auto Scaling instances based on maximum instance lifetime in the Amazon EC2 Auto Scaling User Guide.
sourcepub fn desired_capacity_type(&self) -> Option<&str>
pub fn desired_capacity_type(&self) -> Option<&str>
The unit of measurement for the value specified for desired capacity. Amazon EC2 Auto Scaling supports DesiredCapacityType for attribute-based instance type selection only. For more information, see Creating an Auto Scaling group using attribute-based instance type selection in the Amazon EC2 Auto Scaling User Guide.
By default, Amazon EC2 Auto Scaling specifies units, which translates into number of instances.
Valid values: units | vcpu | memory-mib
sourcepub fn default_instance_warmup(&self) -> Option<i32>
pub fn default_instance_warmup(&self) -> Option<i32>
The amount of time, in seconds, until a newly launched instance can contribute to the Amazon CloudWatch metrics. This delay lets an instance finish initializing before Amazon EC2 Auto Scaling aggregates instance metrics, resulting in more reliable usage data. Set this value equal to the amount of time that it takes for resource consumption to become stable after an instance reaches the InService state. For more information, see Set the default instance warmup for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
To manage your warm-up settings at the group level, we recommend that you set the default instance warmup, even if its value is set to 0 seconds. This also optimizes the performance of scaling policies that scale continuously, such as target tracking and step scaling policies.
If you need to remove a value that you previously set, include the property but specify -1 for the value. However, we strongly recommend keeping the default instance warmup enabled by specifying a minimum value of 0.
Default: None
Trait Implementations§
source§impl Clone for CreateAutoScalingGroupInput
impl Clone for CreateAutoScalingGroupInput
source§fn clone(&self) -> CreateAutoScalingGroupInput
fn clone(&self) -> CreateAutoScalingGroupInput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read more