Module avrd::atxmega32e5

The module containing the values for the 'atxmega32e5' microcontroller The AVR ATxmega32E5 microcontroller

Variants

	Pinout	Mcu age	Operating temperature	Operating voltage	Max speed
ATxmega32E5-AU	QFP-QFN-32	TQFP32	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega32E5-MU	QFP-QFN-32	VQFN32	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega32E5-M4U	QFP-QFN-32	UQFN32	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega32E5-AN	QFP-QFN-32	TQFP32	-40°C - 105°C	1.6V - 3.6V	32 MHz
ATxmega32E5-MN	QFP-QFN-32	VQFN32	-40°C - 105°C	1.6V - 3.6V	32 MHz
ATxmega32E5-M4N	QFP-QFN-32	UQFN32	-40°C - 105°C	1.6V - 3.6V	32 MHz

Modules

ac_hysmode	Hysteresis mode selection
ac_intlvl	Interrupt level
ac_intmode	Interrupt mode
ac_muxneg	Negative input multiplexer selection
ac_muxpos	Positive input multiplexer selection
ac_wintlvl	Window interrupt level
ac_wintmode	Windows interrupt mode
ac_wstate	Window mode state
adc_ch_gain	Gain factor
adc_ch_inputmode	Input mode
adc_ch_intlvl	Interrupt level
adc_ch_intmode	Interupt mode
adc_ch_muxint	Internal input multiplexer selections
adc_ch_muxneg	Negative input multiplexer selection
adc_ch_muxpos	Positive input multiplexer selection
adc_currlimit	Current Limitation
adc_evact	Event action selection
adc_evsel	Event channel input selection
adc_prescaler	Clock prescaler
adc_refsel	Voltage reference selection
adc_resolution	Conversion result resolution
adc_sampnum	Averaged Number of Samples
bod	BOD operation
bodlvl	Brownout Detection Voltage Level
bootrst	Boot Loader Section Reset Vector
ccp	CCP signatures
clk_psadiv	Prescaler A Division Factor
clk_psbcdiv	Prescaler B and C Division Factor
clk_rtcsrc	RTC Clock Source
clk_sclksel	System Clock Selection
crc_reset	Reset
crc_source	Input Source
dac_chsel	Output channel selection
dac_evsel	Event channel selection
dac_refsel	Reference voltage selection
edma_ch_destdir	Destination addressing mode
edma_ch_dir	Memory Address Mode for Peripheral Ch., or Source Address Mode for Standard Ch.
edma_ch_intlvl	Interrupt level
edma_ch_reload	Memory Address Reload for Peripheral Ch., or Source Address Reload for Standard Ch.
edma_ch_trigsrc	Transfer trigger source
edma_chmode	Channel mode
edma_dbufmode	Double buffer mode
edma_primode	Priority mode
evsys_chmux	Event Channel multiplexer input selection
evsys_digfilt	Digital filter coefficient
evsys_prescaler	Prescaler
evsys_prescfilt	Prescaler Filter
evsys_qdirm	Quadrature Decoder Index Recognition Mode
fault_halta	Fault A Halt Action Selection
fault_haltb	Fault B Halt Action Selection
fault_idxcmd	Channel index Command
fault_ramp	Ramp Mode Selection
fault_srca	Fault A Source Selection
fault_srcb	Fault B Source Selection
fault_srce	Fault E Input Source Selection
fuse_blba	Boot lock bits - application section
fuse_blbat	Boot lock bits - application table section
fuse_blbb	Boot lock bits - boot setcion
fuse_lb	Lock bits
hires_hren	High Resolution Mode
hires_hrplus	High Resolution Plus Mode
irda_evsel	Event channel selection
nvm_blba	Boot lock bits - application section
nvm_blbat	Boot lock bits - application table section
nvm_blbb	Boot lock bits - boot setcion
nvm_cmd	NVM Command
nvm_eelvl	EEPROM ready interrupt level
nvm_lb	Lock bits
nvm_spmlvl	SPM ready interrupt level
osc_frqrange	Oscillator Frequency Range
osc_pllsrc	PLL Clock Source
osc_rc32mcref	32 MHz DFLL Calibration Reference
osc_xoscsel	External Oscillator Selection and Startup Time
port_intlvl	Port Interrupt Level
port_isc	Input/Sense Configuration
port_opc	Output/Pull Configuration
portcfg_acout	Analog Comparator Output Port
portcfg_clkevpin	Clock and Event Output Port
portcfg_clkout	System Clock Output Port
portcfg_clkoutsel	Peripheral Clock Output Select
portcfg_evout	Event Output Port
portcfg_evoutsel	Event Output Select
portcfg_rtcclkout	RTC Clock Output Port
rtc_compintlvl	Compare Interrupt level
rtc_ovfintlvl	Overflow Interrupt level
rtc_prescaler	Prescaler Factor
sleep_smode	Sleep Mode
spi_bufmode	Buffer Modes
spi_intlvl	Interrupt level
spi_mode	SPI Mode
spi_prescaler	Prescaler setting
sut	Start-up Time
tc45_bytem	Byte Mode
tc45_ccaintlvl	Compare or Capture Channel A Interrupt Level
tc45_ccamode	Compare or Capture Channel A Mode
tc45_ccbintlvl	Compare or Capture Channel B Interrupt Level
tc45_ccbmode	Compare or Capture Channel B Mode
tc45_cccintlvl	Compare or Capture Channel C Interrupt Level
tc45_cccmode	Compare or Capture Channel C Mode
tc45_ccdintlvl	Compare or Capture Channel D Interrupt Level
tc45_ccdmode	Compare or Capture Channel D Mode
tc45_circen	Circular Enable Mode
tc45_clksel	Clock Selection
tc45_cmd	Timer/Counter Command
tc45_errintlvl	Error Interrupt Level
tc45_evact	Event Action
tc45_evsel	Event Selection
tc45_hccamode	Compare or Capture High Channel A Mode
tc45_hccbmode	Compare or Capture High Channel B Mode
tc45_hcccmode	Compare or Capture High Channel C Mode
tc45_hccdmode	Compare or Capture High Channel D Mode
tc45_lccaintlvl	Compare or Capture Low Channel A Interrupt Level
tc45_lccamode	Compare or Capture Low Channel A Mode
tc45_lccbintlvl	Compare or Capture Low Channel B Interrupt Level
tc45_lccbmode	Compare or Capture Low Channel B Mode
tc45_lcccintlvl	Compare or Capture Low Channel C Interrupt Level
tc45_lcccmode	Compare or Capture Low Channel C Mode
tc45_lccdintlvl	Compare or Capture Low Channel D Interrupt Level
tc45_lccdmode	Compare or Capture Low Channel D Mode
tc45_ovfintlvl	Overflow Interrupt Level
tc45_trgintlvl	Timer Trigger Restart Interrupt Level
tc45_wgmode	Waveform Generation Mode
twi_master_busstate	Master Bus State
twi_master_cmd	Master Command
twi_master_intlvl	Master Interrupt Level
twi_master_timeout	Inactive Timeout
twi_master_tmsext	Master/Slave Extend Timeout
twi_master_ttimeout	Master Timeout
twi_sdahold	SDA Hold Time
twi_slave_cmd	Slave Command
twi_slave_intlvl	Slave Interrupt Level
twi_slave_ttimeout	Slave Ttimeout
usart_chsize	Character Size
usart_cmode	Communication Mode
usart_dectype	Encoding and Decoding Type
usart_dreintlvl	Data Register Empty Interrupt level
usart_lutact	XCL LUT Action
usart_pecact	XCL Peripheral Counter Action
usart_pmode	Parity Mode
usart_rxcintlvl	Receive Complete Interrupt level
usart_rxsintlvl	Receive Start Interrupt level
usart_txcintlvl	Transmit Complete Interrupt level
wd	Watchdog (Window) Timeout Period
wdt_per	Period setting
wdt_wper	Closed window period
wex_otmx	Output Matrix Mode
xcl_cc_intlvl	Compare/Capture Interrupt level
xcl_clksel	Clock Selection
xcl_cmden	Command Enable
xcl_cmdsel	Timer/Counter Command Selection
xcl_cmpen	Compare Output Value Timer
xcl_dlyconf	Delay Configuration on LUT
xcl_dlysel	Delay Selection
xcl_evact	Timer/Counter Event Action Selection
xcl_evsrc	Timer/Counter Event Source Selection
xcl_insel	Input Selection
xcl_lut0outen	LUT0 Output Enable
xcl_lutconf	LUT Configuration
xcl_portsel	Port Selection
xcl_tcmode	Timer/Counter Mode
xcl_tcsel	Timer/Counter Selection
xcl_unf_intlvl	Underflow Interrupt level

Constants

AC	Bitfield on register PRPA
AC0CTRL	Analog Comparator 0 Control.
AC0CURR	Bitfield on register CURRCTRL
AC0MUXCTRL	Analog Comparator 0 MUX Control.
AC1CTRL	Analog Comparator 1 Control.
AC1CURR	Bitfield on register CURRCTRL
AC1MUXCTRL	Analog Comparator 1 MUX Control.
ACACURRCAL	ACA Current Calibration Byte.
ACEVOUT	Analog Comparator and Event Out Register.
ACOUT	Bitfield on register ACEVOUT
ADC	Bitfield on register PRPA
ADCACAL0	ADCA Calibration Byte 0.
ADCACAL1	ADCA Calibration Byte 1.
ADDR	Address Register.
ADDR0	Address Register 0.
ADDR1	Address Register 1.
ADDR2	Address Register 2.
ADDRCTRL	Memory Address Control for Peripheral Ch., or Source Address Control for Standard Ch.
ADDREN	Bitfield on register ADDRMASK
ADDRMASK	Address Mask Register.
ANAINIT	Analog Startup Delay.
AVGCTRL	Average Control Register.
BANDGAP	Bitfield on register REFCTRL
BAUD	Baurd Rate Control Register.
BAUDCTRLA	Baud Rate Control Register A.
BAUDCTRLB	Baud Rate Control Register B.
BLANKB	Bitfield on register CTRLE
BLBA	Bitfield on register LOCKBITS
BLBAT	Bitfield on register LOCKBITS
BLBB	Bitfield on register LOCKBITS
BODACT	Bitfield on register FUSEBYTE5
BODLVL	Bitfield on register FUSEBYTE5
BODPD	Bitfield on register FUSEBYTE2
BOOTRST	Bitfield on register FUSEBYTE2
BSCALE	Bitfield on register BAUDCTRLB
BUFMODE	Bitfield on register CTRLB
BUFOVF	Bitfield on register STATUS
C	Bitfield on register SREG
CAL	Calibration Value.
CALA	Calibration Register A.
CALB	Calibration Register B.
CALH	Bitfield on register CALB
CALIB	Calibration Register.
CALL	Bitfield on register CALA
CAPTB	Bitfield on register CTRLE
CCA	Compare or Capture A.
CCABUF	Compare Or Capture A Buffer.
CCABUFH	Compare Or Capture A Buffer high byte.
CCABUFL	Compare Or Capture A Buffer low byte.
CCAH	Compare or Capture A high byte.
CCAIF	Bitfield on register INTFLAGS
CCAINTLVL	Bitfield on register INTCTRLB
CCAL	Compare or Capture A low byte.
CCB	Compare or Capture B.
CCBBUF	Compare Or Capture B Buffer.
CCBBUFH	Compare Or Capture B Buffer high byte.
CCBBUFL	Compare Or Capture B Buffer low byte.
CCBH	Compare or Capture B high byte.
CCBIF	Bitfield on register INTFLAGS
CCBINTLVL	Bitfield on register INTCTRLB
CCBL	Compare or Capture B low byte.
CCC	Compare or Capture C.
CCCBUF	Compare Or Capture C Buffer.
CCCBUFH	Compare Or Capture C Buffer high byte.
CCCBUFL	Compare Or Capture C Buffer low byte.
CCCH	Compare or Capture C high byte.
CCCL	Compare or Capture C low byte.
CCD	Compare or Capture D.
CCDBUF	Compare Or Capture D Buffer.
CCDBUFH	Compare Or Capture D Buffer high byte.
CCDBUFL	Compare Or Capture D Buffer low byte.
CCDH	Compare or Capture D high byte.
CCDL	Compare or Capture D low byte.
CCP	Configuration Change Protection.
CH0CTRL	Channel 0 Control Register.
CH0DATA	Channel 0 Data.
CH0DATAH	Channel 0 Data high byte.
CH0DATAL	Channel 0 Data low byte.
CH0GAINCAL	Gain Calibration.
CH0MUX	Event Channel 0 Multiplexer.
CH0OFFSETCAL	Offset Calibration.
CH0RES	Channel 0 Result.
CH0RESH	Channel 0 Result high byte.
CH0RESL	Channel 0 Result low byte.
CH1CTRL	Channel 1 Control Register.
CH1DATA	Channel 1 Data.
CH1DATAH	Channel 1 Data high byte.
CH1DATAL	Channel 1 Data low byte.
CH1GAINCAL	Gain Calibration.
CH1MUX	Event Channel 1 Multiplexer.
CH1OFFSETCAL	Offset Calibration.
CH2CTRL	Channel 2 Control Register.
CH2MUX	Event Channel 2 Multiplexer.
CH3CTRL	Channel 3 Control Register.
CH3MUX	Event Channel 3 Multiplexer.
CH4CTRL	Channel 4 Control Register.
CH4MUX	Event Channel 4 Multiplexer.
CH5CTRL	Channel 5 Control Register.
CH5MUX	Event Channel 5 Multiplexer.
CH6CTRL	Channel 6 Control Register.
CH6MUX	Event Channel 6 Multiplexer.
CH7CTRL	Channel 7 Control Register.
CH7MUX	Event Channel 7 Multiplexer.
CHECKSUM0	Checksum byte 0.
CHECKSUM1	Checksum byte 1.
CHECKSUM2	Checksum byte 2.
CHECKSUM3	Checksum byte 3.
CHSIZE	Bitfield on register CTRLC
CLKEVPIN	Bitfield on register CLKOUT
CLKOUT	Clock Out Register.
CLKOUTSEL	Bitfield on register CLKOUT
CMD	Command.
CMODE	Bitfield on register CTRLC
CMP	Compare Value.
CMPH	Compare Register High.
CMPL	Compare Register Low.
CNT	Count.
CNTH	Counter Register High.
CNTL	Counter Register Low.
COMP	Compare Register.
COMP0	Oscillator Compare Register 0.
COMP1	Oscillator Compare Register 1.
COMP2	Oscillator Compare Register 2.
COMPH	Compare Register high byte.
COMPL	Compare Register low byte.
COORDX0	Wafer Coordinate X Byte 0.
COORDX1	Wafer Coordinate X Byte 1.
COORDY0	Wafer Coordinate Y Byte 0.
COORDY1	Wafer Coordinate Y Byte 1.
CORRCTRL	Correction Control Register.
CORREN	Bitfield on register CORRCTRL
CTRL	Control Register.
CTRLA	Control Register A.
CTRLB	Control Register B.
CTRLC	Control Register C.
CTRLD	Control Register D.
CTRLE	Control E Register.
CTRLF	Control Register F.
CTRLG	Control Register G.
CTRLGCLR	Control Register G Clear.
CTRLGSET	Control Register G set.
CTRLHCLR	Control Register H Clear.
CTRLHSET	Control Register H Set.
CURRCALIB	Current Source Calibration Register.
CURRCTRL	Current Source Control Register.
CURREN	Bitfield on register CURRCTRL
CURRMODE	Bitfield on register CURRCTRL
DAC	Bitfield on register PRPA
DACA0GAINCAL	DACA0 Calibration Byte 1.
DACA0OFFCAL	DACA0 Calibration Byte 0.
DACA1GAINCAL	DACA1 Calibration Byte 1.
DACA1OFFCAL	DACA1 Calibration Byte 0.
DATA	Data Register.
DATA0	Data Register 0.
DATA1	Data Register 1.
DATA2	Data Register 2.
DATAIN	Data Input.
DECTYPE	Bitfield on register CTRLD
DESTADDR	Channel Destination Address for Standard Channels Only.
DESTADDRCTRL	Destination Address Control for Standard Channels Only.
DESTADDRH	Channel Destination Address for Standard Channels Only. high byte.
DESTADDRL	Channel Destination Address for Standard Channels Only. low byte.
DESTDIR	Bitfield on register DESTADDRCTRL
DESTRELOAD	Bitfield on register DESTADDRCTRL
DEVID0	Device ID byte 0.
DEVID1	Device ID byte 1.
DEVID2	Device ID byte 2.
DFCTRL	Digital Filter Control Register.
DFLLCTRL	DFLL Control Register.
DIR	I/O Port Data Direction.
DIRCLR	I/O Port Data Direction Clear.
DIRSET	I/O Port Data Direction Set.
DIRTGL	I/O Port Data Direction Toggle.
DREIE	Bitfield on register INTCTRL
DREIF	Bitfield on register STATUS
DREINTLVL	Bitfield on register CTRLA
DRIE	Bitfield on register CTRLA
DTBOTH	Dead-time Concurrent Write to Both Sides Register.
DTHS	Dead-time High Side Register.
DTLS	Dead-time Low Side Register.
EDMA	Bitfield on register PRGEN
EESAVE	Bitfield on register FUSEBYTE5
EIND	Extended Indirect Jump.
ERRIF	Bitfield on register INTFLAGS
ERRINTLVL	Bitfield on register INTCTRLA
ERROR	Bitfield on register CALIB
EVACT0	Bitfield on register CTRLG
EVACT1	Bitfield on register CTRLG
EVACTEN	Bitfield on register CTRLG
EVASYEN	Bitfield on register ACEVOUT
EVCTRL	Event Input Control.
EVOUT	Bitfield on register ACEVOUT
EVOUTSEL	Bitfield on register ACEVOUT
EVSPLIT	Bitfield on register EVCTRL
EVSRC	Bitfield on register CTRLG
EVSYS	Bitfield on register PRGEN
EVSYS0LOCK	Bitfield on register EVSYSLOCK
EVSYS1LOCK	Bitfield on register EVSYSLOCK
EVSYSLOCK	Event System Lock.
FAULTA	Bitfield on register CTRLGCLR
FAULTASW	Bitfield on register CTRLGSET
FAULTB	Bitfield on register CTRLGCLR
FAULTBSW	Bitfield on register CTRLGSET
FAULTC4LOCK	Bitfield on register FAULTLOCK
FAULTC5LOCK	Bitfield on register FAULTLOCK
FAULTE	Bitfield on register CTRLGCLR
FAULTESW	Bitfield on register CTRLGSET
FAULTLOCK	FAULT Lock.
FDACT4	Bitfield on register FUSEBYTE6
FDACT5	Bitfield on register FUSEBYTE6
FILTERB	Bitfield on register CTRLE
FILTSEL	Bitfield on register DFCTRL
FRQRANGE	Bitfield on register XOSCCTRL
FUSEBYTE1	Watchdog Configuration.
FUSEBYTE2	Reset Configuration.
FUSEBYTE4	Start-up Configuration.
FUSEBYTE5	EESAVE and BOD Level.
FUSEBYTE6	Fault State.
GAINCORR	Bitfield on register GAINCORR1
GAINCORR0	Gain Correction Register 0.
GAINCORR1	Gain Correction Register 1.
GPIOR0	General Purpose IO Register 0.
GPIOR1	General Purpose IO Register 1.
GPIOR2	General Purpose IO Register 2.
GPIOR3	General Purpose IO Register 3.
H	Bitfield on register SREG
HALTACLR	Bitfield on register CTRLGCLR
HALTBCLR	Bitfield on register CTRLGCLR
HCCAMODE	Bitfield on register CTRLF
HCCBMODE	Bitfield on register CTRLF
HIRES	Bitfield on register PRPC
HOTTEMP	Temperature corresponds to TEMPSENSE1/0.
I	Bitfield on register SREG
IDXCMD	Bitfield on register CTRLGSET
IF	Bitfield on register STATUS
IN	I/O port Input.
INPUTOFFSET	Bitfield on register SCAN
INPUTSCAN	Bitfield on register SCAN
INTCTRL	Interrupt Control Register.
INTCTRLA	Interrupt Control Register A.
INTCTRLB	Interrupt Control Register B.
INTFLAGS	Interrupt Flag Register.
INTMASK	Port Interrupt Mask.
INTPRI	Interrupt Priority.
LB	Bitfield on register LOCKBITS
LCCAIF	Bitfield on register INTFLAGS
LCCAINTLVL	Bitfield on register INTCTRLB
LCCBIF	Bitfield on register INTFLAGS
LCCBINTLVL	Bitfield on register INTCTRLB
LOCK	Lock register.
LOCKBITS	Lock Bits.
LOTNUM0	Lot Number Byte 0, ASCII.
LOTNUM1	Lot Number Byte 1, ASCII.
LOTNUM2	Lot Number Byte 2, ASCII.
LOTNUM3	Lot Number Byte 3, ASCII.
LOTNUM4	Lot Number Byte 4, ASCII.
LOTNUM5	Lot Number Byte 5, ASCII.
LUTACT	Bitfield on register CTRLD
MPCMASK	Multi-pin Configuration Mask.
MUXCTRL	MUX Control.
MUXINT	Bitfield on register MUXCTRL
N	Bitfield on register SREG
OCDR0	OCD Register 0.
OCDR1	OCD Register 1.
OFFSETCORR	Bitfield on register OFFSETCORR1
OFFSETCORR0	Offset Correction Register 0.
OFFSETCORR1	Offset Correction Register 1.
OUT	I/O Port Output.
OUTCLR	I/O Port Output Clear.
OUTOVDIS	Output Override Disable Register.
OUTSET	I/O Port Output Set.
OUTTGL	I/O Port Output Toggle.
OVFIF	Bitfield on register INTFLAGS
OVFINTLVL	Bitfield on register INTCTRLA
PCNT20	Bitfield on register CNTH
PCNT21	Bitfield on register CNTH
PECACT	Bitfield on register CTRLD
PER	Period.
PERBUF	Period Buffer.
PERBUFH	Period Buffer high byte.
PERBUFL	Period Buffer low byte.
PERCAPTH	Period or Capture Register High.
PERCAPTL	Period or Capture Register Low.
PERH	Period high byte.
PERL	Period low byte.
PGO	Pattern Generation Override Register.
PGOBUF	Pattern Generation Overwrite Buffer Register.
PGV	Pattern Generation Value Register.
PGVBUF	Pattern Generation Value Buffer Register.
PIN0CTRL	Pin 0 Control Register.
PIN1CTRL	Pin 1 Control Register.
PIN2CTRL	Pin 2 Control Register.
PIN3CTRL	Pin 3 Control Register.
PIN4CTRL	Pin 4 Control Register.
PIN5CTRL	Pin 5 Control Register.
PIN6CTRL	Pin 6 Control Register.
PIN7CTRL	Pin 7 Control Register.
PLC	Peripheral Lenght Control Register.
PLLCTRL	PLL Control Register.
PLLDIV	Bitfield on register PLLCTRL
PLLFAC	Bitfield on register PLLCTRL
PLLFDEN	Bitfield on register XOSCFAIL
PLLFDIF	Bitfield on register XOSCFAIL
PLLSRC	Bitfield on register PLLCTRL
PMODE	Bitfield on register CTRLC
PRESC	Bitfield on register DFCTRL
PRESCALER	Clock Prescaler.
PRESCFILT	Bitfield on register DFCTRL
PRGEN	General Power Reduction.
PRPA	Power Reduction Port A.
PRPC	Power Reduction Port C.
PRPD	Power Reduction Port D.
PSADIV	Bitfield on register PSCTRL
PSBCDIV	Bitfield on register PSCTRL
PSCTRL	Prescaler Control Register.
QDEN	Bitfield on register CH0CTRL
QDIEN	Bitfield on register CH0CTRL
QDIRM	Bitfield on register CH0CTRL
QUALB	Bitfield on register CTRLE
RAMPD	Ramp D.
RAMPX	Ramp X.
RAMPY	Ramp Y.
RAMPZ	Ramp Z.
RC8MCAL	Internal 8 MHz RC Oscillator Calibration Register.
RC32KCAL	32.768 kHz Internal Oscillator Calibration Register.
RC32MCREF	Bitfield on register DFLLCTRL
RCOSC8M	RCOSC 8MHz Calibration Value.
RCOSC32K	RCOSC 32.768 kHz Calibration Value.
RCOSC32M	RCOSC 32 MHz Calibration Value B.
RCOSC32MA	RCOSC 32 MHz Calibration Value A.
REFCTRL	Reference Control.
REFSEL	Bitfield on register REFCTRL
RELOAD	Bitfield on register ADDRCTRL
REMAP	Pin Remap Register.
RES	Channel Result.
RESH	Channel Result high byte.
RESL	Channel Result low byte.
REVID	Revision ID.
RIGHTSHIFT	Bitfield on register AVGCTRL
ROOMTEMP	Temperature corresponds to TEMPSENSE3/2.
ROTARY	Bitfield on register CH0CTRL
RSTDISBL	Bitfield on register FUSEBYTE4
RTC	Bitfield on register PRGEN
RTCCTRL	RTC Control Register.
RTCEN	Bitfield on register RTCCTRL
RTCOUT	Bitfield on register CLKOUT
RTCSRC	Bitfield on register RTCCTRL
RXCIE	Bitfield on register INTCTRL
RXCIF	Bitfield on register STATUS
RXCINTLVL	Bitfield on register CTRLA
RXPLCTRL	IrDA Receiver Pulse Length Control Register.
RXSIE	Bitfield on register CTRLA
S	Bitfield on register SREG
SAMPCTRL	ADC Sampling Time Control Register.
SAMPNUM	Bitfield on register AVGCTRL
SAMPVAL	Bitfield on register SAMPCTRL
SBMODE	Bitfield on register CTRLC
SCAN	Input Channel Scan.
SIGN	Bitfield on register CALIB
SPH	Stack Pointer High.
SPI	Bitfield on register PRPC
SPL	Stack Pointer Low.
SREG	Status Register.
SRLCTRL	Slew Rate Limit Control Register.
SRLENRA	Bitfield on register SRLCTRL
SRLENRC	Bitfield on register SRLCTRL
SRLENRD	Bitfield on register SRLCTRL
SRLENRR	Bitfield on register SRLCTRL
SSD	Bitfield on register CTRLB
SSIE	Bitfield on register INTCTRL
SSIF	Bitfield on register STATUS
STARTUPDLYA	Bitfield on register ANAINIT
STATEECLR	Bitfield on register CTRLGCLR
STATUS	Status Register.
STATUSCLR	Status Clear Register.
STATUSSET	Status Set Register.
STROBE	Event Strobe.
SUT	Bitfield on register FUSEBYTE4
SWAP	Swap Register.
SWAP0	Bitfield on register SWAP
SWAP0BUF	Bitfield on register SWAPBUF
SWAP1	Bitfield on register SWAP
SWAP1BUF	Bitfield on register SWAPBUF
SWAP2	Bitfield on register SWAP
SWAP2BUF	Bitfield on register SWAPBUF
SWAP3	Bitfield on register SWAP
SWAP3BUF	Bitfield on register SWAPBUF
SWAPBUF	Dead Time Low Side Buffer.
T	Bitfield on register SREG
TC4	Bitfield on register PRPC
TC4A	Bitfield on register REMAP
TC4B	Bitfield on register REMAP
TC4C	Bitfield on register REMAP
TC4D	Bitfield on register REMAP
TEMP	Temporary Register For 16-bit Access.
TEMPREF	Bitfield on register REFCTRL
TEMPSENSE0	Temperature Sensor Calibration Byte 0.
TEMPSENSE1	Temperature Sensor Calibration Byte 1.
TEMPSENSE2	Temperature Sensor Calibration Byte 2.
TEMPSENSE3	Temperature Sensor Calibration Byte 3.
TMEXTIF	Bitfield on register TOS
TMSEXTSEL	Bitfield on register TOCONF
TOCONF	Timeout Configuration Register.
TOS	Timeout Status Register.
TRFCNT	Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch.
TRFCNTH	Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch. high byte.
TRFCNTL	Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch. low byte.
TRGIF	Bitfield on register INTFLAGS
TRGINTLVL	Bitfield on register INTCTRLA
TRIGSRC	Channel Trigger Source.
TSEXTIF	Bitfield on register TOS
TTOUTMIF	Bitfield on register TOS
TTOUTMSEL	Bitfield on register TOCONF
TTOUTSIF	Bitfield on register TOS
TTOUTSSEL	Bitfield on register TOCONF
TWI	Bitfield on register PRPC
TXCIE	Bitfield on register INTCTRL
TXCIF	Bitfield on register STATUS
TXCINTLVL	Bitfield on register CTRLA
TXPLCTRL	IrDA Transmitter Pulse Length Control Register.
V	Bitfield on register SREG
VALUE	Bitfield on register FUSEBYTE6
WAFNUM	Wafer Number.
WDLOCK	Bitfield on register FUSEBYTE4
WDP	Bitfield on register FUSEBYTE1
WDWP	Bitfield on register FUSEBYTE1
WEN	Bitfield on register WINCTRL
WEXCLOCK	Bitfield on register WEXLOCK
WEXLOCK	WEX Lock.
WINCTRL	Window Mode Control.
WINTLVL	Bitfield on register WINCTRL
WINTMODE	Bitfield on register WINCTRL
WRCOL	Bitfield on register STATUS
X32KLPM	Bitfield on register XOSCCTRL
XCL	Bitfield on register PRGEN
XOSCCTRL	External Oscillator Control Register.
XOSCFAIL	Oscillator Failure Detection Register.
XOSCFDEN	Bitfield on register XOSCFAIL
XOSCFDIF	Bitfield on register XOSCFAIL
XOSCPWR	Bitfield on register XOSCCTRL
XOSCSEL	Bitfield on register XOSCCTRL
Z	Bitfield on register SREG