Crate aidanhs_tmp_parse_generics_shim [−] [src]

This crate provides stable, partial implementations of the parse_generics! and parse_where! macros proposed in RFC #1583. These macros serve two purposes:

They allow crate authors to use the macros in a limited capacity whether or not the RFC is accepted.
They demonstrate to the Rust core team that there is demand for this functionality.
They provide a migration path from the partial implementation to the full one, assuming the RFC does get accepted.

Because these macros are implemented using macro_rules!, they have the following limitations:

In general, only lifetimes 'a through 'z are accepted.
Only a subset of the full output formats are supported.
They are significantly less efficient, and consume a non-trivial amount of the recursion limit.

Links

macro_rules! match_output {
    (
        {
            // Match the fields you care about.
            constr: $constr:tt,
            params: [ $($params:tt,)* ],

            // Ignore the rest; *never* explicitly match `..`!
            $($_fields:tt)*
        },

        $($tail:tt)*
    ) => { ... };
}

Code

$code is the actual source code to be parsed. If it starts with <, the macro will parse a generic parameter list. If it does not start with <, the macro will proceed as though the input started with an empty generic parameter list (i.e. <>).

Examples

The following show how the various invocation forms affect the output:

parse_generics_shim! {
    { constr, params, ltimes, tnames },
    then stringify!(output:),
    <'a, T, U: 'a + Copy> X
}

// Expands to:
stringify!(
    output: {
        constr: [ 'a, T, U: 'a + Copy, ],
        params: [ 'a, T, U, ],
        ltimes: [ 'a, ],
        tnames: [ T, U, ],
    },
    X
)

parse_generics_shim! {
    { constr },
    then stringify!(output:),
    <'a, T, U: 'a + Copy> X
}

// Expands to:
stringify!(
    output: {
        constr: [ 'a, T, U: 'a + Copy, ],
    },
    X
)

parse_generics_shim! {
    { .. },
    then stringify!(output:),
    <'a, T, U: 'a + Copy> X
}

// Expands to:
stringify!(
    output: {
        constr: [ 'a, T, U: 'a + Copy, ],
        params: [ 'a, T, U, ],
        ltimes: [ 'a, ],
        tnames: [ T, U, ],
        ..
    },
    X
)

The input does not have to start with a generic parameter list. Note that both of the invocations below expand to the same result:

parse_generics_shim! {
    { constr, params, ltimes, tnames },
    then stringify!(output:),
    <> X
}

// Expands to:
stringify!(
    output: {
        constr: [],
        params: [],
        ltimes: [],
        tnames: [],
    },
    X
)

parse_generics_shim! {
    { constr, params, ltimes, tnames },
    then stringify!(output:),
    X
}

// Expands to:
stringify!(
    output: {
        constr: [],
        params: [],
        ltimes: [],
        tnames: [],
    },
    X
)

`parse_where_shim!`

macro_rules! parse_where_shim {
    (
        { $($fields:ident),+ },
        then $callback_name:ident ! ( $($callback_args:tt)* ),
        $($code:tt)*
    ) => { ... };
}

Parses a where clause (if present) from the start of $($code:tt)*, expanding to the parsed information plus the unconsumed tokens after the clause. The general form of the expansion is:

$callback_name! {
    $($callback_args)*
    {
        $(
            $fields: [ .. ],
        )+
    },
    $($tail)*
}

Callback

$callback_name and $callback_args specify the macro to invoke with the result of parsing. Note that $callback_args may be contained in any of ( .. ), [ .. ], or { .. }.

Fields

$fields indicates which pieces of information you want in the expansion. The available fields are:

clause - comma-terminated clause including the where keyword. If there is no clause, the where keyword is omitted. Use this if you simply wish to pass a where clause through unmodified.
preds - comma-terminated list of predicates. Use this if you wish to modify or append to the predicates.

The shim only supports the following combinations:

{ clause, preds }
{ preds }
{ .. }

The fields will appear in the output in the same order they appear in the input. One special case is { .. } which causes all fields to be emitted, followed by a literal .. token.

Warning: there is explicitly no guarantee that the list of fields will stay the same over time. As such, it is strongly recommended that you never directly match the .. token after the fields. Instead, you should use the following construct:

macro_rules! match_output {
    (
        {
            // Match the fields you care about.
            clause: [ $($clause:tt)* ],

            // Ignore the rest; *never* explicitly match `..`!
            $($_fields:tt)*
        },

        $($tail:tt)*
    ) => { ... };
}

Code

$code is the actual source code to be parsed. If it starts with where, the macro will parse a where clause, stopping when it encounters any of the following: ;, {, or =. If it does not start with where, the macro will expand with an empty predicate list.

Examples

The following show how the various invocation forms affect the output:

parse_where_shim! {
    { preds },
    then stringify!(output:),
    where
        'a: 'b,
        T: 'a + Copy,
        for<'c> U: Foo<'c>,
    { struct fields... }
}

// Expands to:
stringify!(
    output: {
        preds: [ 'a: 'b, T: 'a + Copy, for<'c,> U: Foo<'c>, ],
    },
    { struct fields... }
)

parse_where_shim! {
    { .. },
    then stringify!(output:),
    where
        'a: 'b,
        T: 'a + Copy,
        for<'c> U: Foo<'c>,
    { struct fields... }
}

// Expands to:
stringify!(
    output: {
        clause: [ where 'a: 'b, T: 'a + Copy, for<'c,> U: Foo<'c>, ],
        preds: [ 'a: 'b, T: 'a + Copy, for<'c,> U: Foo<'c>, ],
        ..
    },
    { struct fields... }
)

The input does not have to start with a where clause:

parse_where_shim! {
    { preds },
    then stringify!(output:),
    ; X
}

// Expands to:
stringify!(
    output: {
        preds: [],
    },
    ; X
)

Using `parse-generics-poc`

For Crate Authors

Add the following to your Cargo.toml manifest:

[features]
use-parse-generics-poc = [
    "parse-generics-poc",
    "parse-generics-shim/use-parse-generics-poc",
]

[dependencies]
parse-generics-poc = { version = "0.1.0", optional = true }
parse-generics-shim = "0.1.0"

This allows your users to enable the proof-of-concept compiler plugin through your crate. You should also copy and modify the following section (replacing whizzo with your crate's name).

For Crate Users

Add the following to your Cargo.toml manifest:

[features]
use-parse-generics-poc = [
    "whizzo/use-parse-generics-poc",
    "parse-generics-poc",
    "parse-generics-shim/use-parse-generics-poc",
]

[dependencies]
whizzo = "0.1.0"
parse-generics-poc = { version = "0.1.0", optional = true }
parse-generics-shim = "0.1.0"

Then, add the following to your crate's root module:

#![cfg_attr(feature="parse-generics-poc", feature(plugin))]
#![cfg_attr(feature="parse-generics-poc", plugin(parse_generics_poc))]
#[macro_use] extern crate parse_generics_shim;
#[macro_use] extern crate whizzo;

By default, this will use stable-but-inferior implementations of the generics-parsing macros. In particular, you cannot use lifetimes other than 'a through 'z, and macros may fail to expand for sufficiently complex inputs.

If a macro fails to expand due to the "recursion limit", place the following attribute at the top of your crate's root module, and raise the number until the macro works:

#![recursion_limit="32"]

If you are using a compatible nightly compiler, you can enable the fully-featured versions of the generics-parsing macros (see the proposed RFC #1583 for context). If you have followed the instructions above, this can be done by adding --features=use-parse-generic-poc to your cargo build command.

The documentation for parse-generics-poc will specify which nightly it is known to be compatible with. If you are using rustup, you can configure your crate to use the appropriate compiler using the following (replacing the date shown with the one listed in the parse-generics-poc documentation):

rustup override add nightly-2016-04-06

Crate aidanhs_tmp_parse_generics_shim [−] [src]

Table of Contents

`parse_generics_shim!`

Callback

Fields

Code

Examples

`parse_where_shim!`

Callback

Fields

Code

Examples

Using `parse-generics-poc`

For Crate Authors

For Crate Users